Manual Falcon 1092 CT Dual Fuel (page 16 of 36) (English)

500342

Zoom out

Zoom in

1/36

Control Panel and Oven Doors

For best results liquid detergents should be

used.

The control panel and control knobs should

only be cleaned with a soft cloth wrung out in

clean hot soapy water - but take care that no

surplus water seeps into the appliance. Wipe

with a clean dampened cloth then polish with

a dry cloth. The oven doors should only be

cleaned with a soft cloth wrung out in clean

hot soapy water.

Cleaning Brass Components

Uncoated natural brass is used as part of the

authentic ﬁ nish and may tarnish with age.

To regain a polished ﬁ nish, these areas should

be cleaned using a proprietary cleaner such

as Brasso. Stubborn marks on the aluminium

burner rings can be removed using a similar

cleaning material. This will also restore the

polished ﬁ nish.

Ovens

The shelf supports on the oven sides can be

removed for cleaning.

First remove the oven shelves then pull the

top of the shelf support up and away from the

oven side and then lift the support away from

the locating bracket in the oven side at the

bottom.

To reﬁ t the side support, ﬁ rst

locate the tag at the bottom

of the support in the slot in

the locating bracket in the

oven side.

Then locate the tops of the

side arms in the holes at the

top.

The panels on the oven sides are ﬁ xed and

cannot be removed. They have been coated

with special enamel that partly cleans itself.

This does not stop all marks on the lining, but

helps to reduce the amount of manual cleaning

needed.

The Cook & Clean panels work better above

200°C. If you do most of your cooking below

this temperature, occasionally remove the shelf

supports and wipe the panels with a lint free

cloth and hot soapy water. The panels should

then be dried and the oven heated at 200°C

for about one hour. This will ensure the Cook &

Clean panels are working eﬀ ectively.

Don’t use steel wool (or any other materials

that will scratch the surface). Don’t use oven

cleaning pads.

Moving your cooker

Switch oﬀ the electricity supply.

The cooker is heavy; two people may be

required to move it.

The cooker is ﬁ tted with one roller at the front

and two at the back. There are also two screws

down levelling feet at the front.

The front roller, designed for moving the

cooker, can be wound down. The levelling

tool that controls this roller should be in the

storage drawer compartment. If you cannot

ﬁ nd the levelling tool, contact your installer.

See the start of the ‘Installation’ section of these

instructions where they should have entered

their details.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falcon 1092 CT Dual Fuel in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falcon 1092 CT Dual Fuel Manual

Product: