40
Kapitel
D
Bedienung
When the dust bag or filters are full or if the accessories are
blocked (hose, pipe, nozzle), the filter change indicator will
shine [24]. To ensure correct analysis, the maximum suction
level [H] needs to be set and the floor nozzle lifted from the
floor.
In this case, change the dust bag or blocked filter or remedy
the blockage.
Suction pipe park position with automatic suction cut-off
Use the park holder to hold the suction tube safely in positi-
on when the cleaner is not being used. To do this, insert the
park holder [25] of the floor nozzle into the nozzle holder on
the reverse of the appliance; the motor is automatically swit-
ched off.
● Press the foot button "On/Off" [G] to switch off the vacuum
cleaner.
● Remove the plug from the mains socket.
● Press the foot button "cable rewind” [D] to reel in the ca-
ble. Gently guide the cable with your hand until the cable
has been completely wound in and the plug rests snugly
against the opening.
WARNING!
Follow the steps below as soon as you stop vacuum
cleaning. Never leave the appliance unattended.
Bedienung
When using the turbo mattress brush or the crevice nozzle,
it is possible that the filter change indicator may shine be-
fore the dust bag or filter is full. This is due to technical rea-
sons and does not mean that the appliance is faulty.
NOTICE!
Operation
Work breaks
25
24
After vacuum cleaning
G
GB
Filter change indicator
H