16
● Place the motor head upside down on a table (preferably
on something soft).
● Remove the motor protection filter and wash it in warm
soapy water, then let it dry completely.
● Insert the cleaned motor protection filter or a new one.
● Remove the Motorhead.
● Pull out the filter frame.
● For cleaning of the exhaust air filter remove it upwards
from the frame, wash it in warm, soapy water, then let it
dry completely.
● Insert the clean and dry / new exhaust air filter and slide
the filter frame back precisely into the motor head.
This high performance filter traps the finest particles almost
entirely. It should always be used when vacuum cleaning
must be carried out to clemanding standards of hygiene and
room air purity. (Optional in 36 20 003, 26 29 003,
26 35 003, 26 37 003) in 36 19 003, 26 36 003
accessories HEPA-Filter - Ref.-No. 26 30 870
accessories in 36 35 003 HEPA-Filter - Ref.-No. 36 35 870
● Remove the Motorhead. Pull out the HEPA-Filter and re-
place it with a new one.
Change the HEPA-Filter after approx. 6 month or in case
it is extremly dirty
After use
Cleaning and replacing
the motor protection filter
Exhaust air filter
Clean the washable motor protection filter regularly. Re-
place after about 5 dust bags or as necessary.
NOTICE!
Clean the washable exhaust air filter regularly. Replace af-
ter about 5 dust bags or as necessary.
NOTICE!
Replacing the HEPA-Filter
HEPA =
High Efficiency Particulate Air filter
en
