Manual Fakir rot (page 40 of 64) (English, German)

713706

Zoom out

Zoom in

1/64

TROUBLESHOOTING

Fault Possible cause Solution

Appliance does not work.

"Plug is not inserted or theap-

pliance is not switched on."

Insert the plug into a mains

socket and switch on the ap-

pliance.

Power outlet does not carry

any power.

Test the appliance at another

socket which you are sure

carries current.

Power cord is damaged.

Have the power cord repla-

ced by an authorised Fakir

service centre.

Appliance suddenly stops va-

cuuming.

"Overheat protection has trip-

ped(possibly due to clogged

suction channels, dirty filters,

etc.)"

Switch off and unplug the ap-

pliance. Eliminate the cause

of overheating (e.g. clogged

suction channels, dirty filters,

etc.). Wait 30 minutes and let

the appliance cool down.

Then switch on the appliance

again.

Vacuum cleaning is unsatis-

factory.

Dust bag is full. Change dust bag.

Filter is dirty or clogged.

Clean or change the corre-

sponding filter.

Nozzle, telescopic suction

tube or suction hose are clog-

ged up.

Eliminate clogging. If neces-

sary, use a wooden stick (e.g.

a broomstick) to do this.

Suction regulator is open. Close suction regulator.

"The power setting does not

suitthe flooring."

Set the power to the setting

suggested for the flooring.

The attached nozzle does not

fit the flooring.

Attach the correct nozzle.

"The “carpet/hard floor”

switch is in the wrong position

for theparticular type of floor."

Set the “carpet/hard floor”

switch to the correct position

for the type of floor.

Appliance runs unusually

loud.

Sucked-in particles have be-

come jammed.

Remove particles. If neces-

sary, use a long wooden stick

(e.g. a broomstick).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fakir rot in the language / languages: English, German as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fakir rot Manual

Product: