565995
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
CHARGING THE BATTERY
1- Before the first use, the battery must be
charged for 15 hours. Before the first charge,
the battery should be fully discharged.
Operate the On/Off switch until the motor
stops. Make sure that the On/Off switch is
returned to the Off position. The battery will
not charge with the switch in the On position.
New batteries, or a battery that has been
stored uncharged for some time, may not
initially accept a full charge. This is normal.
It will charge fully after several charge and
discharge cycles. The battery should always
be charged at ambient air temperatures
of between 40 and 400 C.
2- Locate the cleaner in the charging base,
making sure that the charging socket on the
cleaner is correctly located with the charging
pin on the charging base. See figure 3.
3- Plug the charging adaptor into the mains
supply. The charging indicator LED will light
to show that the battery is accepting the
charge. See figure 4.
CHARGING THE BATTERY - continued
4 Whilst charging, the charging adaptor will
become warm. This is normal and does not
indicate a problem. The cleaner may be
stored in the charging base. However,
ensure that the charger is disconnected
from the mains supply when charging is
complete (maximum 15 hours).
NOTE
After fully charging the battery, the average
effective use of the cleaner is approximately
10 minutes. This will reduce to 8 minutes
if the rotating brush head described on page
9 is used.
USING THE CLEANER
1 Lift and pull the cleaner from the wall
mounting base. See figure 5.
2 Push the On/Off switch forward to switch
On. See figure 6. The cleaner will start.
3 Perform the cleaning operation.
4 Pull the On/Off switch back to switch Off.
See figure 6.
5 Return the cleaner to the wall mounting
base.
CAUTION!
Do not use the cleaner to pick up liquids as
this will severely damage the motor.
Charging
Socket
Charging
Pin
Led
3 4
5
6
Pul
Lift
On Off
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir RCT 108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir RCT 108 in the language / languages: English, Turkish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info