Stand the heater at the required location:
• Unwind the supply cable completely and insert the plug into a power supply socket.
• Switch on the fan heater at the function selector [E]:
Pos. 0 OFF
Pos. I 1000 watt heating > indicator [1] lights
Pos. II 2000 watt heating > indicator [2] lights additionally
Pos. Ä frost gard setting
Room thermostat [F]
The temperature setting is continuously variable with the thermostat control.
Setting:
max. temperature = turn clockwise
min. temperature = turn anti-clockwise
Turn the thermostat control all the way to the right (clockwise). When the desired room
temperature has been reached, turn knob anti-clockwise until the heater is switched off.
The heater automatically switches on again as the room temperature declines.
Frost guard setting Ä
Turn the knob to the frost guard setting so that the room temperature will not drop below
approx. +5°C ( for instance when absent for an extended period ). The appliance will then
automatically switch itself on at approx. +5°C, and off at +7°C, thereby preventing frost
damage.
Overheat safety cut-out
An overheat safety cut-out turns off the appliance in the event of a technical fault or if the
heater is not being used properly. If the cut-out has been activated, then turn the selec-
tor switch knob to the “0” setting, disconnect the heater from the mains, and remedy the
fault or ensure that the heater is being properly used.
The overheat safety cut-out is reactivated after a short cooling down period, and the hea-
ter can once again be operated. Otherwise the appliance has to be checked by a Fakir
after-sales-service
NOTE:
Always ensure that there is adequate minimum distances. The outflowing air
must not be obstructed by any object.
Operation and use
11
2
1
E
F
2000TS-8606.QXD 22.06.2006 11:52 Seite 11
