713853
25
Zoom out
Zoom in
Previous page
1/32
Next page
9
2
5
6
1
4
8
7
3
9
Assembly
en
WARNING!
WARNING!
Assembly
Never use a defective appliance.
Prior to assembly, make sure that the mains
plug is unplugged. If the mains plug is plugged
in, the appliance could accidentally be switched
on, resulting in injuries.
Place the nozzle plate (base foot) [2]
onto the cap nut [3] and fasten with the
enclosed cap nut [1].
Place the back protective grid [5]
exactly onto the motor head [4] (insert
the three pins on the motor head into
the three holes in the protective grid)
and screw tightly using the included
cap nuts [6].
If required, pull off the protective hose
from the motor axle.
Place the fan blades [7] all the way
onto the motor axle and secure with
the included cap nut [8].
Attention: Left-handed thread.
Place the front protective grid [9] exactly into the lower bracket on the rear pro tective
grid [5], push on and fix with the three swivel brackets (left, right and top). Fix both pro-
tective grids at the bottom with the included M3 screw and bolt.
Vertical adjustment
The cooling fan can be set to the desired vertical operating range by hand: from approx-
imately 15° to the front (downwards) up to approximately 25° to the back (upwards).
To do so, hold the cooling fan by the tube and from the back only carefully move the
motor head forwards or backwards until the desired position has been reached.
ATTENTION!
If the fan blade is blocked, switch off the cooling fan immediately and
disconnect it from the power supply. Eliminate the blockage before
operating the cooling fan again.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir Premium VL30 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir Premium VL30 G in the language / languages: English, German as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info