565970
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
USAGE
GB
• Set the waste water container on the Clean water
container back.
• Fit the pump hose into the waste water container and turn
the hose right until it locks.
• Place the upper body again on the lower body and fit them
by closing the ratchets.
• Install the adaptor of suction hose to into the vacuum inlet
and lock it by turning right.
• Connect the tubes of vacuum hose and fix them by turning
the lock clamps right.
• Connect the handle with the tube and fix it by turning the
locking latch right.
• Assemle the chosen nozzle in the tube and fix it by turning
the lock latch right.
• Insert the extraction adaptor into the pump valve until it
locks and ensure that the extraction adaptor is locked by
pulling.
• Plug the cord into the power outlet.
• Turn the power switch on “VAC” position.
• Water extraction will start once pushing the buton on the
handle.
• Start the carpet cleaning at the most dirty areas. Push the
extraction button and vacuum at the same time by pulling
the tube at very dirty areas backwards. Repeat this until
the result is well.
• While moving the nozzle forward and backward during
extraction, you soften and Clean the dirts easily
• Drain the waste water container by refilling the fresh water
container. If the waste water container is full, the appliance
will start to be very loud and will vibrate. So swich off the
appliance directly.
• We advise to rinse the cleaned area with fresh water
again..
• For quick dry of your carpet and couch/sofa, you can turn
the switch to VAC Position and just vacuum the carpet and
couch/sofa.
• Do not forget to Clean your machine and the accesories,
after cleaning operation.
1. You can wash and Clean the water pump by injecting the
Clean water on the rinsing process.
2. Clean the accessories, pipes and Hose of the appliance.
3. To dry the suction hose and tube, operate the appliance
for 1-2 minutes.
4. Rinse and dry the waste water container after draining the
water.
5. Dry the fresh water container
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir ML ROBOTER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir ML ROBOTER in the language / languages: English, Turkish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info