Manual Fakir IC 1025 (page 15 of 28) (English, German, French)

731018

Zoom out

Zoom in

1/28

after use

Cleaning the brush roller

Replacing the drive belt

To achieve a high efficiency of the electric suction brushes, you should regularly remove

hairs, fibres, threads, etc. from the brush rollers and if necessary from the drive belts.

Always switch the battery vacuum cleaner off before you start cleaning.

Remove the electric suction brush from the basic unit.

Remove hair, fibres, threads, etc. which have wound round the brush roller with a knife

or scissors. Thoroughly clean the brushes of the roller and the drive belt (brush off and /

or vacuum clean)

Note :

Before replacing the drive belt remove the belt cover by loosening the screw on the

bottom of the electric suction brush. Take care before screwing together that the new

drive belt is located correctly over the drive pinion of the motor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fakir IC 1025 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fakir IC 1025 Manual

Product: