19
Adding water:
Remove the plug from the mains socket. Release canister clamps and remove motor
head (A). Fill in a maximum of 4,5 litres of tap water or distilled water (J). Insert the waa-
ter suction hose with filter into the opening of water tank (M) and place the motor head
on the canister and fasten the canister clamps (D).
The floor abrush is used to clean floors and walls.
The window pane nozzle is used to clean all types of glass sur-
faces.
Important: If the difference of temperature between the inside
and outside of the window panes is very large, the glass might
break. Therefor the windows must be pre-warmed. To do thishold
the window jet in front of the window pane at a distance of approx.
5-10 cm, move it around with a waving motion to allow the heat
to take effect.
The spray jet is extremely well suited to clean and remove dirt in difficult places: in the
sanitary area of washbasins (taps, drains, overflows), bath or showers, shower divider
profiles, toilets, bidets, etc., cracks, gaps and other areas which are difficult reach e.g.
ribs on radiators joins between ceramic or stone files, in the kitchen on cookers, cupbo-
ards, sinks etc.
For especially difficult or very dirty areas the small round brush with plastic bristles can
be pushed onto the spray jet.
After use
• Switch off the appliance by pressing the switches P1 + P2 to OFF psosition..
• Remove accessories, teh steam tube can be reased by pressing the red button.
• Empty an clean water tank and canister.
Steam cleaning
DS34-8604.QXD 20.04.2006 14:33 Seite 19
