Manual Fakir CL220 (page 31 of 38) (English, Turkish)

565912

Zoom out

Zoom in

1/38

a) Vacuum Cleaning

Check the vacuum cleaner and the power cord each time

before using it. A damaged appliance must not be used.

There is danger of injury.

WARNING!

ATTENTION!

Only use the vacuum cleaner with all fitler intact, in dry

condition and correctly placed. Make sure that the openings

of the vacuum cleaner are not clogged or obstructed.

Otherwise the vacuum cleaner might be damaged.

Your vacuum cleaner is equipped with a safety switch to

prevent overheating. It automatically cuts off the power supply

if the motor is overheated. In this case switch off the vacuum

cleaner and disconnect it from the mains. Remove the cause

of the overheating. Wait for about 45 minutes. After it has

cooled off, you may use the vacuum cleaner again.

NOTICE!

1) Attach the desired nozzle.

2) Pull out the cord until the yellow mark is visible (Fig. 10/1).

If the red marking shows (Fig. 10/2) retract the cord by

pressing the retract button to pull in the cable (Fig. 11/2)

up to the yellow mark again.

WARNING!

3) Switch on the vacuum cleaner with the on/off switch (Fig. 11/1)

4) Set the nozzle switch to “carpet” or “hard floor” according to the floor

(Fig. 12) to be cleaned:

- Hard floor: Laminate, tiles, PVC, etc.

- Carpet: Short-and deep-pile carpets, rugs, etc.

With the bypass vent (Fig. 13/1) you can quickly reduce the

suction power if less power is nede, or to release objects

accientally sucked in.

NOT!

Fig. 10

Fig. 11

Fig. 12

Fig. 13

OPERATION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fakir CL220 in the language / languages: English, Turkish as an attachment in your email.

The manual is 3,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fakir CL220 Manual

Product: