10
Unpack the appliance and check the contents for complete-
ness (see "scope of delivery").
Sort the packaging material and recycle accordingly.
If you notice any transportation damage, please contact
your dealer immediately.
1. Suction hose
Press the socket (1) at the end of the suction tube into the
air inlet opening (2) until it clicks.
2. Suction hose / Telescopic suction tube
Insert the handle (3) of the suction hose into the telescopic
tube (4) with a slight turn.
3. Nozzles / Hand tube resp. Telescopic suction tube
Insert the required nozzle with a slight turn onto the handle
of the suction hose, or onto the telescopic suction tube.
4. Setting the length of the suction tube
Use your thumb to press the slide element (1) in the di-
rection of the arrow.
Hold the lower part of the tube in your other hand and pull
or push the suction tube to the required length.
The vacuum cleaner is now ready for use.
WARNING!
Never use a defective appliance.
NOTICE!
To release the suction hose, push the button on the socket
and pull the hose from the air inlet opening.
Prior to assembly, make sure that the mains plug is un-
plugged. If the mains plug is plugged in, the appliance could
accidentally be switched on, resulting in injuries.
WARNING!
Unpacking
ASSEMBLY
en
Mounting
1
2
3
4
5
4
6
