Manual Fagor ZFK1745X (page 15 of 62) (English, German, Dutch, French, Italian, Portuguese, Spanish)

554733

Zoom out

Zoom in

1/62

Instruction manual

Very important: Please read this manual fully before using your freezer.

This manual has been designed so that the text is linked to the relevant drawings.

Installation

Identify the model of your freezer (“a”, “b”, “c”,

“d”, “e”) by comparing the control panel with the

illustrations.

Your freezer is a NO FROST model if NO FROST

appears on the control panel.

1.1 Unpacking. Remove all the protection.

1.2 Location. Position the freezer away from

heat sources and protected from direct

sunlight to reduce consumption.

Do not install the freezer outside or anywhere

it is exposed to rain.

Air must be able to circulate around the back

of the freezer. Leave 25 mm between the

back of the freezer and the wall behind it. Do

not block the space between your freezer

and the ﬂ oor or ceiling with any object.

Level the freezer to prevent any vibrations or

noise. Remember that if the freezer is located

next to a wall or cabinet, it might make a

small noise.

Also check that the shelves have been ﬁ tted

correctly, and place containers apart to

prevent any vibrations.

1.3 Electrical connection. Stand the freezer

upright for at least 2 hours before plugging

it in. Check the information on the

speciﬁ cations plate (220-240V earthed)

(1.3.1, 1.3.2).

Do not use any adapters or extension leads.

Make sure that the lead is not touching the

motor or trapped underneath it.

1.4 Changing the direction the door opens.

Unplug the freezer from the mains supply

and empty it completely.

Gently lay the appliance on its back (1.4.1).

Identiﬁ cation

english

Undo the screws (1.4.2) and remove the top

hinge and the rotating bushing with the aid of

a screwdriver (1.4.3).

Unplug by pressing on the connector tab

(1.4.4). Remove the freezer door (1.4.5).

Remove the control panel, levering it up

by inserting a screwdriver in the notches

provided for that purpose (1.4.6).

Make a notch for the lead on the other side,

in the area indicated on the casing (1.4.7).

Replace the control panel passing the lead

through the notch made (1.4.8).

Undo the screws from the bottom hinge and

remove it. Change the position of the pin in

the hinge and position it on the other side

(1.4.9).

Fit the door (1.4.11).

Remove the vertical handle and ﬁ t it on the

other side of the door turning it 180º (1.4.10).

Fit the closing capsule in the top hinge

space on the other side (1.14.12). Press the

connector to plug it into the door (1.4.13).

Fit the top hinge and the rotating bushing,

inserting any spare lead in the control panel

(1.4.14) and replace the screws (1.4.15).

Lift the freezer up carefully (1.4.16).

1.5 Levelling the appliance. Adjust the feet so

that it is tilting backwards slightly, to help the

door close correctly (1.5.1).

1.6 Climate class. This freezer is designed for

optimum functioning at a room temperature

of between +10ºC and +43º, climate class

SN-T (1.3.2). Higher or lower temperatures

may affect its performance.

2.1 Switching on the freezer. Press the

button (2.1.1) or (2.1.2). Press

until

a digit appears on the display (2.1.3) or turn

the control (2.1.4, 2.1.5). The display

or the On light

models will light up to

indicate the appliance is switched on.

The child lock is automatically activated in

Use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor ZFK1745X in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor ZFK1745X Manual

Product: