473583
28
Zoom out
Zoom in
Previous page
1/38
Next page
MATRIX INDUCTION
Technical Training
OPERATION
- 28 -
CU3A5
-
MATRIX
-
001
-
Table of main components continued
Description Function Characteristics
TEMPERATURE SENSOR
The temperature sensor is a NTC resistor.
Its function is to detect any overheating of
a pan particularly where the pan is empty
(no heat dissipation)
In the event of overheating, load shedding
occurs through the power board until the
cooking area has reached a moderate
temperature. This load shedding is
transparent for the user.
The temperature sensor is not used for
detecting the presence of a cooking
vessel.
The NTC is housed in a rubber support
placed at the centre of the three inductors.
It is connected to the edge of the power
board.
Value: 110 k at 25°C
Check that each NTC is correctly
positioned.
FAN
Cools the electronic components situated
in the hob.
Note: the supply voltage of the fan varies
according to the temperature detected by
the NTC1 of the power board.
- 8V for 60°C
- 12V for 80
Reminder: the temperature indicated by
the power board NTCs is not the ambient
temperature of the product but the
temperature on the copper.
They are situated next to the diode bridge
and next to the microprocessor. NTC1
and 2 = 2.5K at 25°C
Power supply: 12 Volts - continuous
Amperage: 0.30 A
SILICONE MOUNTINGS
Silicone mountings placed on the centring
pins act as buffers for the inductor plate.
They help to hold the plate and inductors
correctly against the vitroceramic top so
as to obtain the best level of power.
(Risk of breakage when reassembling the
vitroceramic top).
Material: silicone
Electrostatic safety mechanisms Protection against power cuts.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor IF-9000-S-MATRIX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor IF-9000-S-MATRIX in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info