Manual Fagor FFJ 6825X (page 15 of 58) (English, German, Dutch, French, Portuguese, Spanish)

456767

Zoom out

Zoom in

1/58

Instruction manual

Very important: Read this manual carefully before using your refrigerator.

This manual is designed with texts corresponding to drawings.

Installation

Identify the model of your refrigerator (“a”, “b”,

“c”, “d”, “e”) by comparing the control panel with

the illustrations.

1.1 Unpacking. Remove all protective elements.

1.2 Placement. Place the refrigerator away

from heat sources and protect it from direct

sunlight in order to conserve energy.

Do not install the refrigerator in the open air

or where it is exposed to rain.

Air should be able to circulate behind the

refrigerator. Leave 25 mm between the

rear of the refrigerator and the wall. Do not

enclose the space between the refrigerator

and the ﬂ oor or ceiling with any object.

Level the refrigerator to prevent vibration and

noise. Remember that if the refrigerator is

situated next to a wall or cupboard, it could

make some noise.

In addition, make sure that the trays are

correctly placed and position the containers

with a space between them to prevent

vibration.

1.3 Connecting to power. Let the refrigerator

sit in a upright position for at least 2 hours

before connecting it. Check the information

on the speciﬁ cation plate (220-240V with

ground wire) (1.3.1, 1.3.2).

Do not use adapters or extension leads.

Prevent the cord from coming in contact with

the motor or getting trapped beneath it.

1.4 Changing the side that the door opens

from. Disconnect the refrigerator from the

power outlet and empty the inside of the

door.

Identiﬁ cation

english

Remove the upper hinge cover with a ﬂ at

blade screwdriver (1.4.1). Loosen the screws

and remove the hinge mechanism with help

of a screwdriver (1.4.2).

Disconnect by pressing the connector tab.

(1.4.3). Remove the refrigerator door (1.4.4).

Remove the controls with a screwdriver,

prying it away using the grooves placed for

that purpose (1.4.5).

Make a notch for the cable on the opposite

side, as marked on the casing (1.4.6).

Remount the control panel passing the cable

through the notch you made (1.4.7)

Remove the screw cover from the centre

hinge, loosen the screws and remove the

hinge (1.4.8). Move the freezer door up

(1.4.9).

Loosen the screws of the lower hinge and

remove it. Change the position of the hinge

axis and place it on the opposite side.

Place the lower freezer handle on the

refrigerator door and the lower refrigerator

handle on the freezer door, rotated 180º.

Place the vertical handles on the opposite

side rotating them 180º (1.4.11).

Rotate the self-closures and place the one

from the refrigerator on the freezer and vice

versa (1.4.12).

Position the freezer door (1.4.13) and attach

the central hinge (1.4.14). Position the

refrigerator door (1.4.15).

Place the closure mechanism in the upper

hinge space on the opposite side (1.4.16).

Put the cable through the upper hinge and

rotation mechanism and plug it into the door

connector (1.4.17).

Screw in the upper hinge (1.4.18) and put the

cover in place (1.4.19)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor FFJ 6825X in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor FFJ 6825X Manual

Product: