Manual Fagor CAT-40 NG (page 42 of 100) (English, French, Portuguese, Spanish)

485595

Zoom out

Zoom in

1/100

14 Resetting the Coffee

Machine

This function is used to reset any

changes you have made to the factory

settings.

The following settings are affected:

• Cup measures

• Coffee quantities

• Coffee temperatures

• Water hardness

Switch the appliance on and wait until

it is in the base position.

Simultaneously press and hold the

"Descale" key (Fig. 3, j) and the

"Clean" key (Fig. 3, k) . Keep both

keys pressed for around 3 seconds,

until the coffee machine switches off

for a short time, and then switches

back on with the factory settings. The

coffee machine is now reset.

15 Cleaning and Care

To ensure consistent coffee quality and

faultless operation, always keep your

coffee machine clean.

15.1 Regular Cleaning

Caution! Before cleaning, switch off

the coffee machine and allow it to cool

down. Do not use any abrasive, scour-

ing or corrosive cleaning materials.

Wipe the inside and outside of the case

only with a damp cloth.

Note! Never put the coffee machine or

separate parts of the coffee machine in

the dishwasher.

Note! Never put water in the coffee

bean container, as this would damage

the grinder.

Remove the water tank daily (Fig. 7)

and empty any remaining water away.

Rinse out the water tank with fresh

water. Use fresh water every day.

Empty the coffee grounds container

daily, see „Emptying the Coffee

Grounds Container".

Regularly drain the drip tray. This can

be done at any time, but must be done

when the red Drip tray float (Fig. 1, I)

appears through the opening in the

drip grille.

Regularly (at least once per week)

clean the Water tank (Fig. 1, M), Drip

tray (Fig. 1, J), Drip grille (Fig. 1, H) and

Coffee grounds container (Fig. 1, G)

with warm water, a mild washing up

liquid and possibly a brush.

From time to time, remove the coffee

bean container and clear away any res-

idues.

Each time the machine is used for

frothing, remove the frothing aid and

clean off any milk remains. The air

intake opening under the seal must not

become blocked. This can be cleaned

out with a thin needle.

15.2 Cleaning the height adjustment

If the height adjustment of the coffee

dispenser becomes stiff, remove the

coffee grounds container, open the

service cover and remove it. Slide the

height adjuster right down, and off the

bottom. To do this, gently raise the

inside catch. Use warm water to clean

any coffee residues from both parts.

Reassemble the two parts. To do this,

gently pull up the catch. Check the

ease of movement of the height

adjuster. Refit the service cover and

push the grounds container back in

place.

15.3 Emptying the Coffee Grounds

Container

At regular intervals, after every 16 cof-

fee brews "1 cup“ resp. 8 coffee brews

"2 cups“, the "Empty grounds con-

tainer" indicator (Fig. 3, h) signals

that the container has to be emptied

and cleaned.

When the coffee machine is in daily

use, empty the container daily. The

indicator flashes for around 1 minute

each time the machine is switched off,

as a reminder to do this.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT-40 NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 11,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor CAT-40 NG Manual

Product: