34555
26
Zoom out
Zoom in
Previous page
1/46
Next page
THE INDUCTION HOB
Technical training
- 26 -
CU3-INDUCTION-003UK-10/05
COMPONENTS
Designation Function Features
Triple-crown inducer
The cooking zone recognises and fits
automatically the diameter of the
container, 12 to 26 cm diameter, so as to:
Deliver the optimum power
corresponding to the container.
Give excellent heat distribution.
Provide a consistent cooking
temperature
Inducer composed of 3 windings
Diameter 1 : 6 cm
Diameter 2 : 10 cm
Diameter 3 : 22 cm
Pmax : 2800W
Booster : 3200W
Tables : IX3WR, IX6
This source implies the use of a specific
relay installed on the IX3WR power board.
The generator always supplies two coils
at a time but unlike the Krône source,
there is no sequenced distribution
between inside and outside: the board
detects the presence or absence of a
large-diameter source and defines its
operating mode.
Fan
Ensure cooling of electronic components
located in the hob.
Please note:
The fan voltage changes
according to the temperature of the power
board (measure by NTC probe).
8V for 60°C
10V for 70°C
12V for 80°C
The temperature read by the NTC is not
the temperature inside the cabinet but the
copper temperature.
Each generation of hobs is characterized
by a different fan:
IX1 : Tangential to 12VDC
IX2 : 12VDC
IX3,IX3WR : 230VAC, 23W, 270
IX4000, IX6: 12VDC (PC type)
Power board
IX3WR
IX6
The power board is used to manage the
majority of the functions
- Rectification
- Low-voltage power supply
- Power supply to high-frequency inducers
- Checks, using a microprocessor
The power supply frequency varies
between 25kHz at maximum power and
50 kHz at 500W.
The regulation between 50 and 500W is
obtained by clipping the power supply.
A power board is used to supply 2
sources or a double source.
For this purpose, two features exist:
one uses a single inverter with
front/rear distribution relay (IX 1, 2, 3
and IX4000)
the other uses one inverter per
source (IX3 WR)
Note: Hob IX1 is composed of a power
board and a separate control board.
IX4000 and IX6
IX3
IX3WR
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor Brandt CU3 induction 003UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor Brandt CU3 induction 003UK in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info