34555
16
Zoom out
Zoom in
Previous page
1/46
Next page
THE INDUCTION HOB
Technical training
- 16 -
CU3-INDUCTION-003UK-10/05
USE
6.2. - Available powers
Induction hobs propose 9, 12 or 15 power levels on each source, usually comprised between 50 and
2800 W. Certain sources (triple crown or Krône) integrate a booster function that provides a power of
3200 or 3600 Watts.
¾ Example of control with 12 levels
1 2 3 4 5 6 7 8 9 10 11 12
50W 100W 200W 300W 400W 500W 750W 1000W 1250W 1500W 2000W 2800W
Alimentation 500W découpé Power supply with variable frequency
¾ Example of IX6 control with 13 levels and with a 160 mm diameter
1 2 3 4 5 6 7 8 9 10 11 12
13 or
50W 100W 150W 250W 350W 500W 650W 800W 950W 1150W 1400W 1800W 2200W
Clipping 500W power supply Power supply with variable frequency
¾ Example of IX6 control with 13 levels and with a 180 mm diameter
1 2 3 4 5 6 7 8 9 10 11 12
13 or
50W 100W 150W 250W 350W 500W 650W 800W 950W 1150W 1400W 1800W 2800W
Clipping 500W power supply Power supply with variable frequency
¾ Example of IX6 control with 13 levels and with a 210 mm diameter
1 2 3 4 5 6 7 8 9 10 11 12
13 or
50W 100W 150W 250W 350W 500W 650W 800W 950W 1150W 1400W 2000W 3100W
Clipping 500W power supply Power supply with variable frequency
¾ Example of IX6 control with 13 levels and with a 280 mm diameter
1 2 3 4 5 6 7 8 9 10 11 12
13 or
100W 200W 300W 400W 500W 600W 800W 1000W 1200W 1400W 1800W 2800W 3600W
Clipping 500W power supply Power supply with variable frequency
The returned power is variable according to the saucepan dimensions and nature. The above values
have been obtained with an enamelled sheet metal saucepan of 210mm diameter.
For a power lower than 500W (1 to 5), the power varies by clipping the 500W.
From 500W to 2800W (6 to 12), the power varies by frequency variation (50KHz for 500W and
25KHz for 2800W).
Caution: A generator can feed two sources. If these two sources are operating simultaneously, the
maximum power will be limited due to the power distribution between front and rear. The distribution is
performed either by relays (IX1,2,3 and 4000), or by transistors (IX3WR and IX6).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor Brandt CU3 induction 003UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor Brandt CU3 induction 003UK in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info