34555

Fagor Brandt CU3 induction 003UK Manual

12
Zoom out
Zoom in
Previous page
1/46
Next page
THE INDUCTION HOB
Technical training
- 12 -
CU3-INDUCTION-003UK-10/05
INSTALLATION
5 - INSTALLATION
5.1. - Flush mounting
A minimum dimension shall be measured from the wall and sidewalls (back and/or sides).
• Protection of cuts: Chipboards used for making working
planes inflate relatively rapidly in contact with humidity.
Apply to the cut edge a varnish or special glue to protect it
from steam or condensation waters that can rise under the
working plane.
• A seal ensures watertightness with the working plane. It
must be glued under the hob periphery.
• Clips supplied together with the hob are used to fix the hob.
5.2. - Ventilation
Many after-sales department problems are related to bad ventilation. The induction hob is fitted with a
cooling fan that sucks the air through the rear and discharges it to the front. It is necessary, during the
installation, to scrupulously observe the recommendations provided by the user manual. Depending on
the kitchen layout, the hob will be installed:
• Over a furniture with door or with drawer
• Over an oven of same brand
• Over an oven of other brand
• Over a dishwasher
It should not be fitted over a washing machine, refrigerator or a freezer.
4 cm mini
VENTILATION SPACE
2- Dans le cas d’une traverse
rectangulaire ou d’un dessus
fermé, pratiquez une découpe
en biseau pour dégager la
sortie d’air.
1- In the case of a small
cross-piece, no special
contraints.
2- In the case of a rectangula
r
cross-piece or closed top,
perform bevelled cutting to
clear the air outlet.
3- In the case of a prolonged use of several sources simultaneously or o
f
use in warm period, it is recommended you to drill lateral orifices in the
sides of the furniture, at the front, to provide better evacuation of the hot
air. 40 cm
2
minimum.
40 cm
2
mini
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor Brandt CU3 induction 003UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor Brandt CU3 induction 003UK in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info