77185
36
Zoom out
Zoom in
Previous page
1/48
Next page
IT GB FR
36
Gas connection
(Fig. 5) Connect the
appliance to the gas
cylinder or to the install-
ation according to the
prescribed standards in
force, and ensure
beforehand, that the
appliance matches the
type of gas available.
Otherwise, see
"Adaptation to various
types of gas".
Furthermore, check that
the feed pressure falls
within the values
described on the table:
"User chacteristics".
Rigid/semi rigid metal
connection
Carry out the connection
with fittings and metal
pipes (even flexible
pipes) so as to obtain
counter stress the inner
parts of the appliance.
N.B. - when the instal-
lation has been carried
out, check the perfect
sealing of the entire
connection system, by
using a soapy solution.
Electrical connection
(Fig. 6) Prior to carrying
out the electrical connec-
tion, please ensure that:
the plant characteris-
tics are such as to fol-
low what is indicated
on the matrix plate
placed at the bottom of
the working area;
Collegamento gas
(Fig. 5) Collegare
l'apparecchiatura alla
bombola o all'impianto
secondo le prescrizioni
delle norme in vigore
accertandosi
preventivamente che l'ap-
parecchiatura sia
predisposta al tipo di gas
disponibile. In caso
contrario vedi: "Adatta-
mento a diverso tipo di
gas". Verificare inoltre che
la pressione di alimen-
tazione rientri nei valori
riportati nella tabella: "Ca-
ratteristiche utilizzatori".
Allacciamento metallico
rigido/semirigido
Eseguire l'allacciamento
con raccordi e tubi me-
tallici (anche flessibili) in
modo da non provocare
sollecitazioni agli organi
interni all'apparecchio.
N.B. - Ad installazione
ultimata controllare, con
una soluzione saponosa,
la perfetta tenuta di tutto
il sistema di
collegamento.
Collegamento elettrico
(Fig. 6) Prima di effettuare
l’allacciamento elettrico ac-
certarsi che:
le caratteristiche del-
l’impianto siano tali da
soddisfare quanto indi-
cato sulla targa matrico-
la applicata sul fondo
del piano;
Connexion gaz
(Fig. 5) Effectuer la con-
nexion de l’appareil à la
bouteille ou à l’instal-
lation selon les prescrip-
tions des normes en vi-
gueur s’assurant à
l’avance que l’appareil
est reglé pour le type de
gaz disponible. En cas
contraire voir: “Adapta-
tion à un type de gaz
différent”.
Verifier aussi que la
pression d’alimentation
correspond aux valeurs
du tableau: “Caractéri-
stiques utilisateurs”.
Branchement métallique
rigide/semirigide
Effectuer le branchement
avec des raccords à con-
duits métalliques (meme
flexibles) de façon à ne pas
provoquer de contraintes
aux organes internes à l’ap-
pareil.
N.B.: - Quand l’installation
est terminée, controler,
avec une solution savon-
neuse, la parfaite eton-
cheité de tout le système de
branchement.
Branchement électrique
(Fig. 6) Avant d’effectuer
le branchement élec-
trique, s’assurer que:
la tension de l’installa-
tion électrique corre-
spond au voltage indi-
qué sur la plaque si-
gnalétique appliquée
au fond du plan;
Fig. 5 - Abb. 5 - Afb. 5
ISO 7/1
ISO 228/1 (FR)
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor 4 FH 5 GLST X-NAT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor 4 FH 5 GLST X-NAT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info