554743

Fagor 2VFT-320S Manual

17
Zoom out
Zoom in
Previous page
1/58
Next page
english
15
3
Maintenance and
cleaning
• Do not use a steam cleaner.
• Clean the surface of your hob regularly once
it has cooled down. Do not use abrasive
products or sponges. Clean with a damp cloth
and soapy water (3.1.1).
• Once a week, clean thoroughly with products
specifi cally designed for vetroceramic hobs.
We recommend VITRO-CLEN for cleaning and
maintaining your vitroceramic hob.
• Stubborn stains can be removed with the
glass scraper (3.1.2).
• If you accidentally burn some sugar, sugary
elements or plastic on the hob, remove it as
soon as possible with a scraper while it is still
hot. If this is not done, you may be left with
permanent marks.
• Use the blade of the scraper in perfect
condition; replace it if is damaged.
to cancel the rapid heating, press the icon of
the programmed element and select a new
power.
Models dfghjklmo: Select an element and
set it at the maximum power by pressing
until a 9 and a dot
are displayed (2.9.3).
Adjust the power by pressing
; levels
3 to 6 are recommended (2.9.4). After 5
seconds, fast heating is set and the power
will be displayed followed by a dot (2.9.5).
Once the maximum temperature has been
reached, the decimal point will disappear
and the element will continue operating in
the conventional way. To cancel the function,
press the key of the programmed element
and select a new power.
2.10 Vitros with controls. Make sure that the
element you are going to activate is the
element you want to use (2.10.1). Turn
the control to the desired position and the
‘on’ light will come on (2.10.2) which also
indicates the residual heat when the element
is turned off.
On the models with double elements or a
large hotplate, turning the control to the left
will adjust a part of the element and turning
the control to the right will adjust the whole
element (2.10.3).
2.11 Turning the element off. Select the power
0
of the element you want to turn off.
2.12 Residual heat. After using the hob, the
elements will stay hot for some time, which
will vary according to the power selected
and a
or a dot will be displayed on the
elements that are still hot. Do not touch
these elements, as there is a risk of
burning yourself.
Caution: If the power supply is cut off, when
it is restored, the
icon will not be displayed
even if the cooking zone is hot. It is important to
remember this fact.
2.13 Locking function. To prevent children from
handling the appliance. Press down the
key
for 3 seconds and this will activate the lock. To
unlock it, repeat the procedure.
Recommendations:
• Avoid knocking receptacles against the glass.
• Aluminium receptacles are not advisable as
they can stain the glass, unless they have a
stainless steel protective base.
• The heat elements should not be operated
without a receptacle.
• The base of the receptacle must be fl at and
dry.
• Make sure that the diameters of the
receptacles are larger than or the same as
the element to be used and place them in the
centre of the heat source.
• Try not to move the receptacles as this can
scratch the glass.
• Only use the appliance for cooking food. Do
not use the hob as a worktop.
• Do not apply cold water directly onto the hob
when it is hot.
Caution: Intermittent operation of the cooking
zones is not a fault. They operate with longer
or shorter on and off periods depending on the
desired power.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor 2VFT-320S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor 2VFT-320S in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info