649152

Faema E61 Jubile Manual

11
Zoom out
Zoom in
Previous page
1/42
Next page
11
Installazione - Installation - Installation - Installation - Instalación - Instalação
COLLEGAMENTI IDRAULICI
Posizionare l'apparecchio in perfetto piano orizzontale
agendo sui piedini, indi fissarli.
Eseguire i collegamenti idraulici come indicato in figura 1,
rispettando le vigenti norme di sicurezza idraulica del paese
di installazione.
Ricordarsi di interporre nelle giunzioni tra tubi e raccordi le
relative guarnizioni.
Se la durezza dell’acqua è superiore ai 8°F, si consiglia
l’installazione di un appropriato addolcitore ed eventualmente
di una valvola di non ritorno a monte dello stesso; per la
scelta attenersi alle norme locali vigenti in materia di igiene.
Nel caso si dovesse alimentare la macchina con acqua di
durezza superiore agli 8°F, per il buon funzionamento della
stessa, occorre applicare un piano di manutenzione specifico.
La quantità di cloro contenuta nell'acqua non deve superare
i 100 mg/l; in caso contrario provvedere all'installazione di
appropriati dispositivi.
N.B.: nel caso la pressione di rete possa salire oltre 6 bar,
prima dell'addolcitore installare un riduttore di pressione
tarato a 2÷3 bar.
Tubo di scarico: mettere un'estremità del tubo di scarico in
un pozzetto dotato di sifone per l'ispezione e la pulizia.
Montare la bacinella poggiatazze; appoggiarla sulle guide e
spingerla, facendo attenzione che l'innesto dotato di
guarnizione sia correttamente inserito nel raccordo di
scarico.
IMPORTANTE: il tubo di scarico, nelle curve, NON deve avere
un andamento come indicato in figura 2; in tal caso operare
come indicato in figura 3.
HYDRAULIC CONNECTION
Place the machine on a perfectly levelled surface, adjusting
and then fixing the feet in place.
Make the hydraulic connections as per Figure 1, in conformity
to the hidraulics safety laws in force in the country of
installation.
Remember to put the relevant washer in the junctions
between the tubes and the connectors.
If water hardness is higher than 8° F, it is advised to install a
water softener and, possibly, a non return valve before it. For
the choice, please comply with local hygiene laws.
If the machine is fed with water with a hardness of over 8° F,
a specific maintenance plan must be implemented to ensure
correct functioning of the machine.
The amount of chlorine in the water must not exceed 100
mg/l; otherwisw, install the appropriate devices.
N.B.: if the main pressure could rise above 6 bar, install a
pressure reducer calibrated at 2÷3 bar before the softener.
Drain tube: place one end of the drain tube into a tank with a
siphon for inspection and cleaning.
Assemble the cup tray. Rest it on the guides and push,
ensuring that the connection piece with gasket is correctly
inserted into the disposal tube junction.
IMPORTANT: The disposal tube must NOT bend as in Figure
2. See Figure 3 for correct positioning.
I
GB
Fig. 1
MACCHINA
MACHINE
addolcitore
automatico
automatic
softener
Fig. 3
Fig. 2
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faema E61 Jubile at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faema E61 Jubile in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info