554410
15
Zoom out
Zoom in
Previous page
1/33
Next page
Installazione - Installation - Installation - Installation - Instalación - Instalação
LIGAÇÃO DO GÁS (apenas para modelos con + GAS)
Respeitando as normas internacionais de segurança, a ligação do gás
pode ser feita quer com tubo rigido quer com tubo flexível (ver figura).
No caso de instalação com tubo flexível:
- Em dotação são fornecidos 2 ligações para borracha a fim de favorecer
a mon tagem de tubos, as quais correspondem às normas de segurança
com diversas dimensões, em função do tipo de gas utilizado.
- Fixar o tubo nas ligações de borracha usando braçadeiras com parafuso
correspondentes às normas de segurança.
Uma vez que a ligação foi efectuada, verificar e controlar eventuais fugas
de gás mediante o uso de água e sabão e eliminá-las; lembramos que no
caso de imperfeito funcionamento a responsabilidade é do instalador.
Substituição dos injectores
A máquina encontra-se predisposta para funcionar com GPL (gás liquido)
ou seja, tem o injector e o auto-regulador montados e regulados na fábrica
para tal tipo de gás.
Se o gás é diferente é necessário mudar o injector "A" que se encontra
montado, com aquele apropriado:
- desprender a mola de bloqueagem do queimador.
- retirar o queimador depois de ter desapertado o parafuso "B".
- substituir o injector com aquele apropriado (ver tabela).
- montar tudo de novo não se esquecendo de montar a mola de
bloqueagem do queimador.
P
CONEXION DEL GAS (solo para modelos con + GAS)
Tomado en consideración los reglamentos locales, la conexión con la
tuberia del gas se puede efectuar sea con un tubo rigido, que con un tubo
flexible, ver figura. Para la instalación con tubo flexible:
- En dotación se suministran dos empaLmes portagoma que favorecen
la instalación de las tuberías, conformes a las normativas de seguridad,
con diferentes dimensiones, en función del tipo de gas utilizado.
- Bloquear el tubo sobre los empalmes portagoma con sbrazaderas
conformes a las normativas de seguridad.
Una vez que se haya efectuado la conexión, verificar e individuar
eventuales fugas con solución jabonosa y eliminarlas; nos permitimo
recordar la responsabilidad del instalador en el caso de funcionamento
defectuoso de la instalación.
Sustitucion de los inyectores
La máquina estápredispuesta para su alimentación con GPL ( gas liquid),
o sea tiene el inyector y el autoregulador y calibrados en fábrica para
dicho tipo de gas.
Si a caso el gas fuera diferente, es necesario cambiar el inyector "A"
instalado, con otro idóneo:
- desenganchar la pinza que bloquea el quemador.
- hacer resbalar el quemador después de haber aflojado el tornillo "B".
- substituir el inyector con el fabricado adrede (ver prospecto).
- posicionar de nuevo todas las piezas acordandose de enganchar
nuevamente le abrazadera que bloquea el quemador.
E
GASANSCHLUSS (ausschl. für modelle + GAS)
Je nach örtlich geltenden Bestimmungen kann für den Anschluß an
die Gasleitung sowohl ein Rohr als auch ein Schlauch verwendet
werden (siehe Abbildung).
- Unter den mitgelieferten Extrateilen befinden sich 2
Schlauchhalterungsanschlüsse zur leichteren Anbringung der
Schläuche, die den Sicherheitsbestimmungen entsprechen und in zwei
verschiedenen Größen ausgeführt sind (auszuwählen je nach
gegebener Gasart ).
- Den Schlauch an den Schlauchhalterungsanschlüssen mit
Schlauchschellen sichern, die den Sicherheitsbestimmungen
entsprechen.
Nach Erstellung des Gasanschlusses die Leitungen mit Hilfe einer
Seifenlösung auf Austritte überprüfen und gegebenenfalls beseitigen.
Wir erinnern, daß für eine unsachgemäße Funktionstüchtigkeit der Anlage
der Installateur haftbar gemacht wird
Ersetzung der Einspritzventile
Das Gerät ist vorbereitet für die Versorgung mit GPL-Gas (Flüssiggas),
d.h. das Einspritz- und das Selbstregelventil sind im Werk für diese
Gasart ausgewählt und tariert worden.
Sollte das Gerät mit einer anderen Gasart versorgt werden, ist das
eingebaute Einspritzventil "A" mit dem jeweils erforderlichen zu ersetzen;
- Die Sperrfeder des Brenners aushaken.
- nach Lockern der Schraube "B" den Brenner wegschieben.
- das Einspritzventil mit dem geeigneten Ventil ersetzen (siehe Tabelle).
- alle Teile in ihre vorherige Position zurückbringen und auch die
Sperrfeder des Brenners wieder einhaken.
D
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faema Due S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faema Due S in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info