753346
22
Zoom out
Zoom in
Previous page
1/36
Next page
EN 2
22
FIXING THE PLATE
Lift up the fixing plate, taking care to ensure that the limit pawl
is positioned frontally.
Fit the slots onto the two screws previously inserted in the
ceiling, and turn until they are at the centre of the adjustment
slot.
Tighten the two screws completely and screw in the other two
provided; before locking the screws completely it is possible to
make adjustments by turning the piece, making sure that the
screws do not come out of the adjustment slot.
The unit must be securely fastened both due to the weight of
the Hood and the stress caused by occasional sideways pres-
sure on the Appliance when in position. Once the unit has been
fixed, make sure that the plate is stable.
In all cases where the Ceiling is not sufficiently strong at the
point of suspension, the Installation technician must strengthen
it with suitable plates and counterplates, anchored to
structurally sound elements.
2
112
FIXING THE PLATE EXTENSION (NEST MODEL)
Take the 2 Extensions 2.1 and hook them in the slots provided
in Plate 2 which has already been fitted.
Mark on the ceiling the centres of the holes in the plates.
Remove the extensions.
Drill a hole ø 10 mm (insert Plugs 11 supplied immediately).
Hook up the extensions again and fix them using the screws
12h provided.
2.1
11
12h
12h
11
2.1
2
2.1
2.1
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Zoom Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Zoom Plus in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Zoom Plus

Faber Zoom Plus User Manual - German - 36 pages

Faber Zoom Plus User Manual - Dutch - 36 pages

Faber Zoom Plus User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info