Manual Faber Wirdum (page 10 of 28) (English, German, Dutch, French)

525626

Zoom out

Zoom in

1/28

9 < < < <

UK IRL

2.4 Assembly of the Surround

• Establish the central point of the fireplace and mark this on the backing wall.

• Establish the distance between the heater and the backing wall.

• If the backing wall is not level, you can fill it later.

• Lay the hearth so that it is level in all directions (from front to rear and left to

right).

• Install the heater in terms of its heating function (see instructions supplied with the

appliance).

• Put the left- and right-hand uprights/sidepieces in position. These have already

been glued together. They should fit on the left- and right-hand side of the hearth.

The heater must be clear of the fireplace to allow for expansion and contraction

with heat. Any gaps can be sealed with a ceramic rope or similar.

• Fill the space between the uprights and the backing wall with brickwork or

Promatec, to allow further assembly. The uprights may be attached to this

structure. The structure must also be able to absorb pressure at right angles onto

the backing wall. We therefore recommend a brickwork structure.

• Saw the filler pieces to the right size. The size depends upon the way in which the

hearth is fitted in relation to the fireplace.

• The components may be fastened together using acid-free silicone paste or two-

component marble adhesive. Silicone paste takes longer to set, and so gives you

more time to match the pieces exactly. It is also easier to remove (for example,

using fishing line), if the pieces need to be disassembled.

• After this, you can fill the seams with the special coloured fitting kit.

• Left-over filler pieces can be stored in the upper section.

• Check that all the connections are gas-tight and test the operation of the

appliance.

• Add the finishing touches to the fireplace.

2.5 Cleaning and maintenance

Clean the fireplace using a dry non-scratch cloth or a vacuum cleaner. Do not use cleaning

agents.

Be careful! The use of cleaning agents may cause discoloration of the stone. Also be

careful when placing vases or flower pots on the fireplace.

If you do wish to use a cleaning agent, consult your retailer first. Your retailer can advise

about special cleaners for natural stone.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber Wirdum in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber Wirdum Manual

Product: