753228
8
Zoom out
Zoom in
Previous page
1/60
Next page
EN 8
8
INSTALLATION
Wall drilling and bracket fixing
Draw a vertical line on the wall on the right or on the left side depending on the hood model,
at 200 mm (90 cm hood version) or at 350 mm (120 mm hood version) taking as a reference
point the centre of the hob. Start the line from the ceiling or from other upper limit and fin-
ish it at the 650 mm distance from the hob. This line is needed when aligning the brackets.
• Place the 7.2.1 bracket, as indicated, at 1-2 mm from the ceiling or from other upper limit
aligning its central point on the vertical reference line.
Draw the central points of the bracket holes.
• Place the 7.2.1 bracket, as indicated, at X mm under the first bracket (X= upper chimney
height) aligning its central point on the vertical reference line.
Draw the central points of the bracket holes.
Draw the reference point, as indicated, at 116 mm from the vertical reference point and at
970 mm above the hob.
Repeat the same procedure on the opposite side.
Draw the reference point, as indicated, at Z mm (Z= see the table) from the vertical refer-
ence point and at 690 mm above the hob.
Drill ø 8 mm the marked points.
• Insert the 11 plugs into the holes.
Fix the brackets using the 12a screws (4,2 x 44,4 ) supplied with the hood.
Screw the 2 12a screws (4,2 x 44,4), supplied with the hood, in the hood body fixing holes.
It is necessary to leave a 5-6 mm gap between the wall and the screw head.
Cappa Y Z
90 cm 200 565
120 cm 350 830
7.2.1
970
X1÷2
Y
116
650 min.
116
Y
11
12a
690
Z
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Stilo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Stilo in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Stilo

Faber Stilo Installation Guide - All languages - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info