752932
3
Zoom out
Zoom in
Previous page
1/116
Next page
3
1. SAFETY
INFORMATION
For your safety and
correct operation of the
appliance, read this manual
carefully before installation
and use. Always keep these
instructions with the
appliance even if you move
or sell it. Users must fully
know the operation and
safety features of the
appliance.
The wire connection has
to be done by specialized
technician.
The manufacturer will not be
held liable for any damages
resulting from incorrect or
improper installation.
The minimum safety
distance between the cooker
top and the extractor hood
is 650 mm (some models
can be installed at a lower
height, please refer to the
paragraphs on working
dimensions and installation).
If the instructions for
installation for the gas hob
specify a greater distance,
this must be respected.
Check that the mains voltage
corresponds to that indicated
ontheratingplatexedto
the inside of the hood.
Means for disconnection
must be incorporated in the
xedwiringinaccordance
with the wiring rules.
For Class I appliances,
check that the domestic
power supply guarantees
adequate earthing.
Connect the extractor to
theexhaustuethrougha
pipe of minimum diameter
120 mm. The route of the
uemustbeasshortas
possible.
Regulations concerning the
discharge of air have to be
fullled.
Do not connect the extractor
hood to exhaust ducts
carrying combustion fumes
(boilers,replaces,etc.).
If the extractor is used
in conjunction with non-
electrical appliances (e.g.
gas burning appliances), a
sufcientdegreeofaeration
must be guaranteed in the
room in order to prevent the
backowofexhaustgas.
When the cooker hood is
used in conjunction with
appliances supplied with
energy other than electric,
the negative pressure in the
room must not exceed 0,04
mbar to prevent fumes being
drawn back into the room by
the cooker hood.
The air must not be
dischargedintoauethatis
used for exhausting fumes
from appliances burning gas
or other fuels.
EN
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Stilo Smart X A90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Stilo Smart X A90 in the language / languages: All languages as an attachment in your email.

The manual is 13,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Stilo Smart X A90

Faber Stilo Smart X A90 User Manual - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info