752972
6
Zoom out
Zoom in
Previous page
1/128
Next page
6
4.
CONTROLS
A B C D E
Button Function Led
ATurns the motor on/off at speed one. The Led remains on at all motor
speeds.
Press and hold the button for approximately 2 seconds, with all the loads
turned off (Motor and lights OFF) to perform a reset of the lters if the
lteralarm isactivated.
TheLed ashesthree times.
Saturationofthegreaselterstakes place after100hoursofcontinuous
operation of the hood. TheLed ashesonce asecond.
Saturationof the activatedcharcoal lterstakesplace after200hours of
continuous operation of the hood. TheLed ashesonce every
0.5 seconds.
BTurns the Motor on at speed two. On.
Press and hold the button for approximately 2 seconds, with all the loads
turned off (Motor and Lights), to turn the Activated Charcoal Filter alarm
on. Led (A)ashes twice toconrm.
To turn the alarm off, press the button again and hold for approximately
2 seconds. The relevant Led (A)ashesonce.
Flashing.
CTurns the Motor on at speed three. On.
Press and hold for approximately 2 seconds, with all the loads turned off
(Motor and Lights), to enable the remote control. TheLed ashestwice.
To turn the alarm off, press the button again and hold for approximately
2 seconds. The Led (A)ashesonce. The Ledashes once.
DTurns the Motor on at INTENSIVE 1 speed.
This speed is timed to run for 10 minutes. At the end of this time, the
system returns automatically to the speed selected previously. If it is
activated when the motor is off, the motor will turn OFF again when the
time has passed.
To deactivate it, press button D once more or press button A.
The Led ashes once a second
and Led A lights up continuously.
Press and hold for approximately 2 seconds to activate INTENSIVE 2 speed.
This speed is timed to run for 6 minutes. At the end of this time, the system
returns automatically to the speed selected previously. If it is activated when
the motor is off, the motor will turn OFF again when the time has passed.
Press and hold button D or button A for approximately 2 seconds to
deactivate the function.
The Led ashes once every 0.5
seconds and Led A lights up
continuously.
EPressbriey arst time:turnsthe lighton atmedium intensity.
Pressbriey asecond time:lightat maximumintensity.
Pressbriey athird time:lightturns off.
-
Press and hold the button for approximately 2 seconds, when the light is
on, to change the light colour temperature, switching from a warm light
(approximately 2700K) to a neutral light (approximately 4000K).
-
5. REMOTE CONTROL
(OPTIONAL)
6. LIGHTING
For replacement contact technical support
(“To purchase contact technical support”).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Pyana at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Pyana in the language / languages: All languages as an attachment in your email.

The manual is 49,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Pyana

Faber Pyana Installation Guide - All languages - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info