695258

Faber MatriX 800-serie Manual

30
Zoom out
Zoom in
Previous page
1/44
Next page
Installation Instructions
30
Pilot stays lit
NO
NO
NO
YES
YES
NO
Main burner
stays on?
Pilot lift, thermocouple not
in pilot flame anymore.
NO
Solenoid drops out while
NO
motor is turning and gives 3
- Gasket between pilot burner is
leaking?
- Gasket between burner unit is
leaking?
- Glass seal is leaking?
- Flue parts aren't 100%
connected? (check flue system)
Replace batteries in the receiver.
beep signals.
NO
NO
YES
The flames are yellow
after 10/15 minutes?
Flame stays blue, lift from
the burner and fire switch
NO
of?
- Check flue calculation.
(horizontal length to long?)
- Correct flue restrictor?
- Flue parts not correct installed?
- Wall/roof terminal blocked?
Check the distance from
thermocouple to pilot flame?
Measure the mvolts over the
thermocouple, required min.
4mvolts over black and ground
contact.
Short circuit in the
thermocouple circuit.
Faulty solenoid.
Check the complete
wiring of thermocouple
circuit.
Replace the gas valve.
Main burner starts
automatically?
YES
Knob A must be in the
ON position.
Inlet pressure still ok?
Second thermocouple
(if present) isn't heated by
a flame from the
mainburner.
Faulty second thermocouple (if present?)
Check mvolts!
Downloaded from www.Manualslib.com manuals search engine
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber MatriX 800-serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber MatriX 800-serie in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info