751509
22
Zoom out
Zoom in
Previous page
1/36
Next page
EN 2
22
FIXING THE PLATE
Lift up the fixing plate, taking care to ensure that the
limit pawl is positioned frontally.
Fit the slots onto the two screws previously inserted in
the ceiling, and turn until they are at the centre of the
adjustment slot.
Tighten the two screws completely and screw in the
other two provided; before locking the screws
completely it is possible to make adjustments by
turning the piece, making sure that the screws do not
come out of the adjustment slot.
The unit must be securely fastened both due to the
weight of the Hood and the stress caused by occa-
sional sideways pressure on the Appliance when in
position. Once the unit has been fixed, make sure that
the plate is stable.
In all cases where the Ceiling is not sufficiently strong
at the point of suspension, the Installation technician
must strengthen it with suitable plates and
counterplates, anchored to structurally sound
elements.
2
112
FIXING THE PLATE EXTENSION (NEST MODEL)
Take the 2 Extensions 2.1 and hook them in the slots
provided in Plate 2 which has already been fitted.
Mark on the ceiling the centres of the holes in the
plates.
Remove the extensions.
Drill a hole ø 10 mm (insert Plugs 11 supplied imme-
diately).
Hook up the extensions again and fix them using the
screws 12h provided.
2.1
11
12h
12h
11
2.1
2
2.1
2.1
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Kaleidos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Kaleidos in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Kaleidos

Faber Kaleidos Usermanual and installation guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info