Manual Faber Glassy Isola (page 10 of 106) (English, German, Dutch)

746561

Zoom out

Zoom in

1/106

Fixing the Frame/Chimney

Should it be necessary to adjust the height of the frame, proceed

as follows:

• Unfasten the metric screws joining the two opposite parts that

can be seen from the front;

• Adjust the height of the frame as required, then replace the

screws removed as above, making sure that you insert 2 of

them close to the panel lock;

• Lift the frame, insert the slots onto the screws and slide them

until they lock;

• Tighten the two screws and insert the other two screws pro-

vided.

• Take the telescopic chimney locking bracket 7.2, remove the

film from the double sided adhesive and fix it inside the frame

so as to hold it more firmly.

Before final locking of the screws it is possible to make small

adjustments to the frame, making sure that the screws do not

come out of the adjustment slot.

• The Frame must be securely fastened both due to the weight of

the Hood and the stress caused by occasional sideways pres-

sure on the Appliance when in position. When fastened, check

that the base is stable even when the Frame is subjected to

bending.

• In all cases where the Ceiling is not sufficiently strong at the

point of suspension, the Installation technician must strengthen

it with suitable plates and counterplates, anchored to structur-

ally sound elements.

Ducted version air exhaust system Connection

When installing the ducted version, connect the hood to the

chimney using either a flexible or rigid pipe ø 150 or 120 mm,

the choice of which is left to the installer.

• To install a ø 120 mm air exhaust connection, insert the re-

ducer flange 9 on the hood body outlet.

• Fix the pipe using the pipe clamps 25 (not provided).

• Remove any activated charcoal filters.

ø 150

ø 120

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber Glassy Isola in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber Glassy Isola Manual

Product: