753279
3
Zoom out
Zoom in
Previous page
1/116
Next page
3
1. SAFETY INFORMATION
For your safety and correct
operation of the appliance,
read this manual carefully before
installation and use. Always keep
these instructions with the ap-
pliance even if you move or sell
it. Users must fully know the
operation and safety features of
the appliance.
The wire connection has to
be done by specialized
technician.
The manufacturer will not be
held liable for any damages
resulting from incorrect or im-
proper installation.
The minimum safety distance
between the cooker top and
the extractor hood is 650 mm
(some models can be installed
at a lower height, please refer
to the paragraphs on working
dimensions and installation).
If the instructions for installa-
tion for the gas hob specify a
greater distance, this must be
respected.
Check that the mains voltage
corresponds to that indicated
ontheratingplatexedtothe
inside of the hood.
Means for disconnection must
be incorporated in the xed
wiring in accordance with the
wiring rules.
For Class I appliances, check
that the domestic power supply
guarantees adequate earthing.
Connect the extractor to the
exhaustuethroughapipeof
minimum diameter 120 mm.
Therouteoftheuemustbe
as short as possible.
Regulations concerning the dis-
chargeofairhavetobefullled.
Do not connect the extractor
hood to exhaust ducts carrying
combustionfumes(boilers,re-
places, etc.).
If the extractor is used in con-
junction with non-electrical
appliances (e.g. gas burning
appliances),asufcientdegree
of aeration must be guaranteed
in the room in order to prevent
the backow of exhaust gas.
When the cooker hood is used
in conjunction with appliances
supplied with energy other than
electric, the negative pressure in
the room must not exceed 0,04
mbar to prevent fumes being
drawn back into the room by
the cooker hood.
The air must not be discharged
intoauethatisusedforex-
hausting fumes from appliances
burning gas or other fuels.
If the supply cord is damaged, it
must be replaced from the man-
ufacturer or its service agent.
Connect the plug to a socket
complying with current regula-
tions, located in an accessible
place.
With regards to the technical
and safety measures to be
adopted for fume discharging
EN
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Glam Light Zero Drip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Glam Light Zero Drip in the language / languages: All languages as an attachment in your email.

The manual is 21,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Glam Light Zero Drip

Faber Glam Light Zero Drip Installation Guide - All languages - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info