473606

Faber Gala opti-myst Manual

24
Zoom out
Zoom in
Previous page
1/60
Next page
23 < < < <
L
2.9 Troubleshooting
Symptom
Cause
Solution
Flame effect does not start
The plug is not in the wall
socket.
Switch ”A” is in ´ON´ position,
but switch “B” has not been
pressed.
Water level is low.
Plug on collection reservoir is
not connected properly
(See Fig.9)
Put the plug in the wall socket.
Press switch “B”.(See Fig.2)
When the switch is ´ON´
Fill water tank.
Check the connection within the appliance (See Fig.9)
The flame effect is too low.
The flame effect button “C” is
switched low (See Fig.2)
The water level in the
collection reservoir is too high,
because the drawer was
opened several times, the
water tank was removed
several times or the fireplace
was moved.
The metal discs in the
collection reservoir are dirty.
(See Fig.14)
Turn the flame effect button “C” up. (See chapter 2.5.2)
When the water level in the collection reservoir is higher
than 40mm, the reservoir should be emptied in the sink.
Clean the metal discs with the supplied brush.
(See chapter 2.8.2)
Unpleasant smell during use
Dirty or old water.
Unfiltered tap water has been
used.
Clean the unit as described in chapter 2.8
Only use filtered tap water.
The flame effect gives off
too much smoke
The flame effect button “C” is
too high
Turn the flame effect button “C” down (See chapter 2.5.2)
Turn slowly until the desired effect has been reached.
Turn the button a quarter to the right, and give the smoke
generator some time to adjust.
The lights are not burning
and there is no smoke visible
Water tank is empty
Appliance has not been
connected properly
Appliance is switched off.
Fill the water tank (See chapter 2.7.2).
ensure that the plug is inserted in the wall socket properly
Put switch “A” in the “ON” position and/or
press switch “B” once until one beep can be heard.
Condensation on the glass.
The glass surface is cold.
Turn the flame effect down during this process.
Scale on the glass.
Unfiltered water was used
Use filtered water.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Gala opti-myst at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Gala opti-myst in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info