Manual Faber Gala opti-myst (page 19 of 60) (English, German, Dutch, Danish, French, Italian)

473606

Zoom out

Zoom in

1/60

18 < < < <

The Gala has a glass back panel, if not desired can this be removed. To do this unscrew the 4 screws

of the back plate, remove the glass and mount the back plate using the 4 screws.

Build up the rest of the surround and ensure that the glass can be removed.

2.4.3 Installation as one sided without surround or as a see through.

The Gala can be built in a wooden casing.

The Gala has a glass back panel, if not desired can this be removed. To do this unscrew the 4 screws

of the back plate, remove the glass and mount the back plate using the 4 screws.

If the Gala will be built in as a see-through, remove the back plate by unscrewing the 4 screws. The

glass is visible.

Ensure that the appliance is levelled, and that the glass can be removed.

The appliance can be screwed to the casing with 2 screws. Ensure that there is adequate ventilation

in the casing.

The Gala is supplied with a MDF drawer which can be painted in every desired colour.

2.5 User manual

2.5.1 Instructions for use

1. First fill the water tank before the appliance is switched on. (see par. 2.8.2).

2. Only pull the drawer in order to operate the fireplace, refill the water tank or replace a light,

otherwise it may lead to a high water level in the collection reservoir, which will lead to a

lower flame effect. If this happens, empty the collection reservoir as indicated in par. 2.9.2.

3. With flame height set to minimum, the water use will be 40 ml per hour, and the appliance

will burn three times as long as when the flames height is set to maximum.

4. Do not move or replace the fireplace while there is water in the water tank or the

collection reservoir.

5. The flames will move more realistically when the button for flame control is turned low.

6. Give the flame generator some time to react to changes when you change the flame effect.

7. If the appliance is not used for a period longer than 2 weeks, empty the water tank and the

collection reservoir en dry them with a cloth.

8. When the water tank is empty the lights will go out and you will hear two beeps. The

fireplace will go into stand-by mode.

9. The lights should be inspected regularly as described in par. 2.8.1.

Depending on the room temperature and humidity some condensation can appear on the inside

of the fireplace. This can be prevented by turning the flame effect lower, just until the glass

has warmed up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber Gala opti-myst in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber Gala opti-myst Manual

Product: