461201
9
Zoom out
Zoom in
Previous page
1/20
Next page
8 < < < <
UK IRL
2.2 (Manual)control
Depending on the model, the gas control block is positioned either:
behind a stainless steel door on the underside of the appliance
mounted in the middle of the floor plate of the appliance
behind the frame (accessible by tilting the frame upwards)
These appliances are fitted with a manual GV36 gas control (see fig.2.1) that optionally
can be adjusted with a G30 remote control.
The pilot light always has to be lit before the main burner can be used. Rotary knob A
functions as a main valve and has to be used to lit the pilot light. Use rotary knob B to
adjust the height of the flames.
Warning! When the pilot extinguishes, for whatever reason, you should wait at least 5
minutes before trying again. Possible causes of pilot extinguish are:
operation error
interference of the safety device
failure in the pilot flame system
Contact a qualified installer when the appliance extinguishes regularly.
2.2.1 Pilot ignition
To ignite the pilot light:
simultaneously press and turn rotary knob A anti-clockwise to the
(small flame)
position at the
(spark) position a click will be heard and the piezo-electric
element starts to ignite
hold the knob in this position for some seconds to clear the air from the pipe and
allow gas to reach the pilot burner
if the pilot light does not light return to the
(stop) position and restart
hold the knob for about ten seconds after the pilot light ignites
turn the knob anti clockwise to the
(large flame) position to allow the main
burner to be ignited (see main burner ignition)
2.2.2 Pilot extinguish
To extinguish the pilot light:
first turn rotary knob B clockwise till the (off) position
turn rotary knob A clockwise to the
(small flame) position
simultaneously press and turn rotary knob A clockwise to the
(off) position
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Ease-BF 110H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Ease-BF 110H in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Ease-BF 110H

Faber Ease-BF 110H User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info