696801
14
Zoom out
Zoom in
Previous page
1/24
Next page
Manual e-MatriX 800
14
11 Technical data
12 Trouble shooting
Watts W 250
Volts V 230-240
Batteries remote V (2x) 1,5 AA
Water consumption l/h 0,15
Inlet water pressure Bar 0,5-8
Water connection Inch ½ or ¾
Symptom Cause Action
Mains plug is not plugged in.
Check plug is connected to wall socket
correctly.
See Chapter 8.3.
Low water level.
Check that the connector(s) is inserted
correctly see fig. 7.0.
The transducers) are not connected
properly.
Low water level. See Chapter 8.3.
Switch the mains switch of the Control box to
the OFF position.
Check all connections on water leakage.
Check that the ball valves are open.
The absorption valve is activated See Chapter 10.3.
e-MatriX will not operate, the LED’s
continuously to blink once every eight
seconds.
Water level too high.
Check the electromechanical valve in the
Control box.
Switch the mains switch of the Control box to
the OFF position and heck all connections on
water leakage.
Close the ball valves and check the mesh filter,
by unscrewing the base of it to see that it is not
clogged with dirt and debris.
The flame effect is too low on the highest
setting.
The transducers and/or air filter are dirty. Call for maintenance.
The flame effect is too high and there is too
much smoke.
The extract fan doesn’t work anymore.
Check if the fan, mounted at the top inside the
fire, is running.
Low batteries. Place new batteries.
Remote isn’t paired to receiver. See Chapter 8.2.1.
Distance to fire too big See Chapter 9 (remote control).
The flame effect will not start.
the LED’s continuously to blink twice.
continuously to blink four times.
Water filling time is too long.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber e-MatriX 800-II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber e-MatriX 800-II in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber e-MatriX 800-II

Faber e-MatriX 800-II User Manual - German - 24 pages

Faber e-MatriX 800-II User Manual - Dutch - 24 pages

Faber e-MatriX 800-II User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info