525636
8
Zoom out
Zoom in
Previous page
1/28
Next page
7 < < < <
UK IRL
2 USER MANUAL
Your fireplace is made of marble or limestone, a natural material. So it is quite normal
that there may be variations in colour and structure from one piece to another and from
one product to another. Guarantee: keep the guarantee certificate in a safe place,
together with your proof of purchase.
Despite our rigorous quality control, there is still a small chance that your fireplace may
have been damaged in transit.
Check all parts for damage before commencing installation. Damages and/or discolours
have to be reported before installing the surround otherwise the guarantee will be void
“an installed surround means an accepted surround”.
Filler pieces (1000 x 90 x 30 mm) are available from stock in all colours. Larger fireplace
parts usually have to be ordered.
2.1 Introduction
These installation instructions contain information about the assembly and maintenance of
your ambience fireplace, and also advice about safety during installation.
If you read this instruction manual carefully, you will soon find out how to install your
fireplace properly.
2.2 SAFETY PRECAUTIONS
The appliance must not be altered in any way
Make sure that there is sufficient insulation between the appliance and the natural
stone fireplace
When installing the natural stone fireplace, always make sure that the base is level
(preferably, perfectly horizontal), clean and, above all, stable
Before starting on the installation, check that the supplied materials are complete
and undamaged
It is strongly recommended that, if possible, you first conduct a 'dry run' of the
fireplace assembly. Among other things, this will allow you to see how the various
parts fit together
The fireplace components may be glued together using marble adhesive or acid-
free silicone paste. The latter has the advantage that it allows for later dismantling
(as long as it is only applied at certain points)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Cora at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Cora in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info