Manual Faber Aura (page 8 of 20) (English, German, Dutch, French)

461218

Zoom out

Zoom in

1/20

7 < < < <

UK IRL

2 User Manual

2.1 Safety instructions for the user

• If a gas leak is found or suspected, turn off the gas supply at the meter and contact

your installer or gas emergency service

• These instructions should be read carefully and retained for future reference

• Remove any stickers, protection foil and protection rubber of the glass

• Do not use the fire with a broken or damaged glass

• The fire has a safety device which turns off the gas supply if there is a build up

from flue gasses in the combustion room or a temporary gas cut-off. Wait at least 5

minutes before turning the appliance on again. Contact a qualified installer when

the appliance goes off regularly

• Since the appliance has been designed for heating purposes all surfaces, including

the glass, can become very warm (over 100 °C). An exception to this is the lower

side of the door and the control buttons

• Due to the newness of materials, they may give off a slight smell for a period after

initial lighting. This is normal, odours will disperse after a few hours use

• Do not place curtains, clothing, laundry, furniture or other flammable materials

near the appliance. The required minimum distance is 100 cm

• Switch off the receiver of the remote control if you don’t use the fire for a long

time. Do not let children use the remote control without supervision

IMPORTANT: A suitable Fireguard conforming to BS6539 and BS6778 should be used with

this appliance to protect children, the elderly or infirm. Care should also be taken with

pets. In your own interest and that of safety, all gas appliances must be installed by

competent persons. Installation must be in accordance with National Regulations. CORGI

registered installers are required to work to recognised standards. See also the installation

guide.

Note: Since the appliance is a source of heat, circulation of air occurs. Therefore it is of

importance that you do not use the appliance shortly after a renovation of the home. Due

to the natural circulation of air, moist and volatile components from paint, building

materials, carpet etc. will be attracted to the lit fire. These components can settle onto

cold surfaces in the form of soot. As on all heat producing appliances, soft furnishings such

as blown vinyl wallpaper placed too near to the appliance may become scorched or

discoloured. This should be born in mind when installing the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber Aura in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber Aura Manual

Product: