473611
5
Zoom out
Zoom in
Previous page
1/100
Next page
5
Controls

   

   
Button Function Led
LTurns the lights ON/OFF at
maximum intensity. -
Press and hold the button
for approximately 4 seconds,
with all the loads turned off
(Motor and Lights), to turn
the Activated Charcoal Filter
alarm on/off.
LED S1
ashes twice
= alarm ON.
T1 Turns the motor on/off at
speed one.
-
Press and hold the button
for approximately 2 seconds,
with all the loads turned off
(Motor and Lights), to reset
the Activated Charcoal Filter
alarm.
LED S1 turns
OFF (Fixed or
Flashing).
S1 Signals the Metal Grease
Filter saturation alarm, indi-
cating that it is necessary to
wash the lters. The alarm
is triggered after the Hood
has been in operation for
100 working hours.
Fixed
When this is activated, it sig-
nals the Activated Charcoal Fil-
ter saturation alarm, indicating
that the lter must be changed;
the Metal Grease Filters must
also be washed. The Activated
Charcoal Filter saturation alarm
comes into operation after the
Hood has been working for 200
hours.
Flashing
Remote control
The appliance can be controlled
using a remote control powered
by a 1.5 V carbon-zinc alkaline
batteries of the standard LR03-AAA
type (not included).
Do not place the remote control
near to heat sources.
Used batteries must be disposed
of in the proper manner.
Button Function Display
Turns the Motor On/Off. -
Decreases the speed of the Motor. -
Increases the speed of the Motor. -
INTENSIVE
- Activates Intensive speed from any
other speed.
To disable it, simply press the
same button again or turn the
motor off.
- Intensive speed is timed to run
for 6 minutes. At the end of the
6 minutes the system
automatically returns to the speed
set previously.
-
Press briey for the Delay Function:
Can only be activated if the Inten-
sive or 24h function is not active.
Activates and deactivates total
shutdown of the hood (motor+lights)
after 30 minutes:
To disable the Delay, simply press
the button again or turn the motor
off.
The led on
the motor
button (on
the hood
controls) will
ash once
every 0.5
seconds.
Press and hold for 2sec for the
24H Function:
Can only be activated if the Inten-
sive or Delay function is not active.
Activates and deactivates the 24H
function for 10 minutes every hour,
for 24 hours. After this time it is
deactivated.
The led on
the motor
button (on
the hood
controls) will
ash once
every 2
seconds.
Turns the Hood lights On/Off at
maximum intensity.
-
Press and hold for 2sec to turn
the Hood lights On/Off at reduced
intensity.
-
Lighting
For replacement contact technical
support (“To purchase contact
technical support”).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Algemeen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Algemeen in the language / languages: All languages as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Faber Algemeen

Faber Algemeen Specifications - English, Italian - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info