752940
14
Zoom out
Zoom in
Previous page
1/32
Next page
14
Cleaningmetalgreaselters
The metal grease lters can be cleaned in hot detergent
solution or washed in the dishwasher. They should be
cleaned every 2 months, or more frequently if use is par-
ticularly heavy.
Remove the lter, pushing the lever towards the back of
the unit and at the same time pulling downward.
Wash the lter without bending it, leave it to dry thorou-
ghly before replacing (if the surface of the lter changes
color over time, this will have absolutely no effect on its
efciency).
Replace, taking care to ensure that the handle faces
forward.
Cleaning in dishwasher may dull the nish of the metal
grease lter.
Replacing Activated Charcoal Filter
The Activated Charcoal Filters are not washable
and cannot be regenerated, and should be replaced
approximately every 4 months of operation, or more
frequently with heavy usage.
Remove the charcoal lter by rotating it clockwise (back-
wards) until it unlocks from the motor housing and pull
off sideways.
To re-insert each charcoal lter, place up against the side
of the blower and push it inward. Then turn the charcoal
lter clockwise (forward) until it ts into place.
Replacing the two 35W Halogen GU10 bulbs
Turn off electrical supply before replacing bulbs, and make
sure bulbs are cool to touch before proceeding.
Carefully remove the snap-on lamp cover using a at head
screwdriver by levering it down from under the metal ring.
After the snap-on lamp cover is down remove the halogen
lamp at the base and turn slightly to the left and the pull
out from the connector and turn slightly to the left.
Replace the lamp with a new one of the same type,
making sure that you insert the two pins properly into the
housings on the lamp holder.
Replace the snap-on lamp cover.
Once the bulb pins are in place turn slightly to the right
to secure.
1
2
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Agio 30PR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Agio 30PR in the language / languages: English, French as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info