752940
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
6
7
8
Reattach the control box and
support. Make sure that the wiring
harness is concealed behind the
support.
Use Power Cable provided with
3-Prong Plug for Electrical Con-
nection.
Attach the backdraft damper to
the proper exhaust opening using
two silver screws (12e) supplied with
the rangehood.
Attach the rangehood to the cabi-
net bottom. The four key holes slip
onto the four screws mounted to the
cabinet bottom. Tighten the screws.
Turn the power supply on. Turn
on blower and light.
DUCTLESS INSTALLATIONS
For ductless installations, the blower
must be positioned with the exhaust
pointing forward (so that the exhaust
exits from the front grill) before at-
taching the rangehood to the cabinet.
Ductless installations require Char-
coal Filters.
Remove both grease lters, the central
support and the control box. Remove
the two thumb screws on either side
of the blower and remove the blower
from the mounting guides.
Remove the two black lter holders (A)
in gure on each end of the blower by
removing the 3 screws. Then Rotate
the blower 180° so that the exhaust
points out the front of the rangehood.
Replace the black lter holders and
the two thumb screws and tighten so
that the blower is securely fastened
inside the rangehood as indicated in
gure. Reattach the control box and
central support. Make sure that the
wiring harness is concealed behind
the central support.
A
A
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Agio 30PR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Agio 30PR in the language / languages: English, French as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info