Manual Faber 2152-2156 (page 11 of 128) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian)

753314

Zoom out

Zoom in

1/128

EN 1

CARE AND CLEANING

GREASE FILTER

Regular maintenance and cleaning will ensure good performance

and reliability, while extending the working life of the hood. Spe-

cial attention should be taken to keep the grease filter clean at all

times and the charcoal filter (recirculation model) should be re-

placed regularly. To remove filters for subsequent cleaning and

replacement first open the metal grille panel.

This retain the solid grease particles. It is fitted onto the reverse

side of the lower grille panel and can be either of a synthetic ma-

terial or metallic. Maintenance of the grease filter varies accord-

ing to the type used: synthetic grease filters should not be washed

and should be replaced every three months. The metal grease fil-

ters should be washed once a month in hot water using mild de-

tergent or liquid soap. It should not be bent and should be left to

dry before being refitted. The filter is easily removed from grille

by pushing the spring wire clips to one side and removing.

CHARCOAL FILTER

In the recycling mode the charcoal filter absorbs smells and

odours. The charcoal filter cannot be cleaned and should be re-

placed at least every six months or more frequently if the hood is

used consistently.

To replace the charcoal filter, support the filter with one hand,

remove the round disk through the centre of the charcoal filter

and rotate it till the filter will come away .

Replace by reversing the operation.

WARNING! It is a possible fire hazard if the filters are not

cleaned and replaced as recommended.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber 2152-2156 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 3,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber 2152-2156 Manual

Product: