560682
3
Zoom out
Zoom in
Previous page
1/11
Next page
2
2
1
1
2
2
2
5
3
4
6
6
RX
RX
TX
TX
7
a
b
c
d
e
f
g
1113
750
311
85
85
119
S450H
ENGLISH
1 DESCRIPTION AND TECHNICAL SPECIFICATIONS
1.1 DIMENSIONS
a Front fitting
b Cover
c Emergency release with key
d Plastic cover for rear bracket
e Rear bracket
f Encoder
g Spacer for opening mechanical stop
TECHNICAL
SPECIFICATIONS
CBAC
OPERATOR
SB
OPERATOR
Power supply (V dc) 24 - 36
Power consumption (W) 60 (nominal) - 288 (maximum)
Protection class IP 55
Oil type FAAC HP OIL
Operating temperature -20°C +50°C
R.O.T. (24V) Continuous at 55°C
Hydraulic lock Installed Not installed
Traction/thrust force
max (N)
5000 (E124) - 3600 (E024S)
Max. opening angle See table 1
Max. leaf length (m) 2 3
Rod linear speed (Cm/s) 2,5 (E124) - 2,0 (E024S)
Effective rod stroke (mm) 311
Operator weight (kg) 7.1 6.9
2 PRESETTINGS
b RX Photocells (receiver)
(TRADITIONAL: 4 x 0.5 mm²; 2easy bus: 2 x 0.5 mm²)
b
TX Photocells (transmitter) (2 x 0.5 mm²)
c Electronic control unit
(power supply 3 x 1.5 mm²)
d Key-operated push-button (e.g. T11) (3 x 0.5 mm²)
e Flashing lamp 24 V dc (2 x 1 mm²)
f Opening mechanical stops*
g Electric lock and closing mechanical stop
(2 x 1.5 mm)
3 INSTALLATION OF THE AUTOMATED SYSTEM
Following conditions have to be met to ensure safety and the
efficient operation of the automated system:
The gate structure must be suitable for automation. Verify in
particular that it is sufficiently strong and stiff and that dimensions
and weight correspond to those stated in the technical
specifications.
Verify the smooth and uniform movement of leaves, without
irregular friction during the whole travel.
• Verify the good condition of hinges.
• Verify the presence of mechanical limit switches.
• Remove any locks and bolts.
Carry out any metalwork operations before installing the
automated system.
Fig. 1
Fig. 2
The FAAC S450H automated system for swing-leaf gates consists
of an electrical pump and an hydraulic piston transmitting the
leaf movement, assembled in a single block.
The model with hydraulic lock can automate leaves up to 2 m.
It does not require the installation of electric locks and guaran
-
tees that the leaf is mechanically locked when the motor is not
in operation. The model without hydraulic lock always needs
one or more electric locks to guarantee the leaf mechanical
lock. The S450H automated systems have been designed
and built to automate swing-leaf gates. Avoid any other use
whatever.
Without encoder the automated system does not operate
correctly.
Fig. 3
Dimensions in millimeters
* CONSIDERING 40 bar (E124) 30 bar (E024) STATIC PRESSURE
ON PISTONE
** CONSIDERING A RANGE OF PUMP 1.5 lpm (E124) AND 1.2
lpm (E024S)
a
DISTANCE (m)
20 m 35 m 50 m
ø MOTOR CABLE
2x2.5 mm² 2x4 mm² 2x6 mm²
ø 2 easy bus
ENCODER CABLE
2x0.5 mm² 2x0.5 mm² 2x0.5 mm²
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FAAC S450H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FAAC S450H in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FAAC S450H

FAAC S450H User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info