560694
32
Zoom out
Zoom in
Previous page
1/40
Next page
30
C850 532015 Rev. A
ENGLISH
12.2 PROGRAMMING THE INVERTER
WARNING: DO NOT CHANGE parameters
other than those indicated in this section.
Incorrect changes can be dangerous for
people, things or the C850 motor.
The inverter parameters have all been set on default values by
the manufacturer during testing.
Among all of them, the installer only has available a few
programmable inverter parameters:
A020 = Deceleration Speed (Value Range = 0-20Hz / Default
Value = 10)
A021 = Running Speed (Value Range = 50-120Hz / Default
Value = 60)
F002 = Acceleration Time (Value Range = 0.01-99.99 / Default
Value = 2.5)
F003 = Deceleration Time (Value Range = 0.01-99.99 / Default
Value = 2.5)
PROGRAMMING THE A020 DECELERATION SPEED
For programming, proceed as follows:
with the gate stationary and powered, the inverter display
will show
0.0;
press the BLUE button, and the display will show
the first group of parameters
d001;
press the GREY button until the parameter group
A appears;
press the BLUE button, and the display will show
A001;
press one of the two GREY buttons until
A020 appears;
press the BLUE button, and the display will show
the value of the parameter;
press one of the two GREY buttons until
the desired value appears;
press the YELLOW button to confirm;
to exit programming, press the BLUE button for 5
sec, until
d001 appears;
press the BLUE button to exit, and the display will
show
0.0.
PROGRAMMING THE A021 RUNNING SPEED
For programming, proceed as follows:
with the gate stationary and powered, the inverter display
will show
0.0;
press the BLUE button, and the display will show
the first group of parameters
d001;
press the GREY button until the parameter group
A appears;
press the BLUE button, and the display will show
A001;
press one of the two GREY buttons until
A021 appears;
press the BLUE button, and the display will show
the value of the parameter;
press one of the two GREY buttons until
the desired value appears
press the YELLOW button to confirm;
to exit programming, press the BLUE button for 5
sec, until
d001 appears;
press the BLUE button to exit, and the display will
show
0.0.
PROGRAMMING THE F002 ACCELERATION TIME
For programming, proceed as follows:
with the gate stationary and powered, the inverter display
will show
0.0;
press the BLUE button, and the display will show
the first group of parameters
d001;
press the GREY button until the parameter group
F appears;
press the BLUE button, and the display will show
F001;
press one of the two GREY buttons until
F002 appears;
press the BLUE button, and the display will show
the value of the parameter;
press one of the two GREY buttons until
the desired value appears;
press the YELLOW button to confirm;
to exit programming, press the BLUE button for 5
sec, until
d001 appears;
press the BLUE button to exit, and the display will
show
0.0.
PROGRAMMING THE F003 DECELERATION TIME
For programming, proceed as follows:
with the gate stationary and powered, the inverter display
will show
0.0;
press the BLUE button, and the display will show
the first group of parameters
d001;
press the GREY button until the parameter group
F appears;
press the BLUE button, and the display will show
F001;
press one of the two GREY buttons until
F003 appears;
press the BLUE button, and the display will show
the value of the parameter;
ress one of the two GREY buttons until the
desired value appears;
press the YELLOW button to confirm;
to exit programming, press the BLUE button for 5
sec, until
d001 appears;
press the BLUE button to exit, and the display will
show
0.0.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FAAC C850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FAAC C850 in the language / languages: English as an attachment in your email.

The manual is 13,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info