Manual FAAC C850 (page 8 of 40) (English)

560694

Zoom out

Zoom in

1/40

C850 532015 Rev. A

295 mm

256 mm

510 mm

467 mm

ENGLISH

Dimensions in mm

3 DIMENSIONS

1. Operator

2. Flashing lamp

3. 2easy-BUS photocells

4. Traditional photocells

5. Key control

5 INSTALLING THE AUTOMATED SYSTEM

5.1 PRELIMINARY CHECKS

For the safety and correct operation of the automated system, ensure that the following conditions are met:

• The gate structure must be designed to be automated. In particular, the diameter of the wheels must conform to the weight of

the gate being automated, there must be a guide on top and mechanical limit switches sized to suit the weight and speed of

the movable leaf, to avoid derailment of the gate;

• Initially, leave at least 10 cm of clearance between the movable leaf stopping points (FCO and FCC) and the

mechanical stops of the gate. The final adjustment is made once the inverter programming procedure is completed.

Minimum distance 3 cm

• The gate sliding rail must be linear and horizontal.

• Manual movement of the gate must be smooth along the entire stroke.

• The characteristics of the ground must guarantee sufficient solidity of the foundation plinth.

• No tubes or electrical cables should be present in the plinth digging area.

• If the gearmotor is exposed to vehicle transit, provide for adequate protection against accidental impact, when possible.

• Ensure that there is an efficient earth plate for connecting the gearmotor.

Should the various elements not meet the above-mentioned conditions, adjust them so they do.

4 ELECTRICAL PREPARATIONS (standard system with right-hand opening)

Fig. 2

Fig. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of FAAC C850 in the language / languages: English as an attachment in your email.

The manual is 13,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

FAAC C850 Manual

Product: