696239
26
Zoom out
Zoom in
Previous page
1/40
Next page
26 ENGLISH
CHRONO CAN1
This function allows you to program the ducting to switch on and o automatically.
The factory setting for CHRONO CAN1 is o.
The chrono allows you to program 4 time slots within a day to be used for every day of the week.
In each time slot, it is possible to set the ignition and switch-o times, the days of use of the programmed time slot. The current
date and time setting is essential for the correct operation of the timer.
Recommendations
Before using the chrono function, you must set the current date and time, so check that you have followed the points listed in the sub-
chapter “DATE/TIME. To make sure that the chrono function works properly, as well as programming it, it is also necessary to activate
it. The 4 time slots can be overlapped by setting the ignition and switch-o times. In this way, a combination of times is obtained in
which it is possible to set dierent temperatures and powers without aecting the operating status of the stove.
N.B.: if there are overlapped time slots, the product will remain on until the furthest switch-o time.
CHRONO CAN2
This function allows you to program the ducting to switch on and o automatically.
The factory setting for CHRONO CAN2 is o.
> For details, see chapter CHRONO CAN1
PRG 14
Prg x allows you to set the ignition and switch-o time, the days of use of the programmed time slot.
The current date and time setting is essential for the correct operation of the timer.
To set: OK > CHRONO CAN X > PRGX
ENABLING
It allows to enable/disable the timer and the dierent time slots of the stove.
To set: OK > CHRONO CAN X> ENABLING.
CHRONO > ENABLING > ENABLE PRG 1
On/o Enable/disable PRG 1
>
ENABLE PRG 2
On/o Enable/disable PRG 2
>
ENABLE PRG 3
On/o Enable/disable PRG 3
>
ENABLE PRG 4
On/o Enable/disable PRG 4
>
PRG1 > START PRG1
OFF-00:00-23:50 Ignition time PRG1
>
STOP PRG1
OFF-00:00-23:50 Switch-o time PRG1
>
MONDAY...SUNDAY
On/o Enable/disable the days of PRG1
>
PRG2 > START PRG2
OFF-00:00-23:50 Ignition time PRG2
>
STOP PRG2
OFF-00:00-23:50 Switch-o time PRG2
>
MONDAY...SUNDAY
On/o Enable/disable the days of PRG2
>
PRG3 > START PRG3
OFF-00:00-23:50 Ignition time PRG3
>
STOP PRG3
OFF-00:00-23:50 Switch-o time PRG3
>
MONDAY...SUNDAY
On/o Enable/disable the days of PRG3
>
PRG4 > START PRG4
OFF-00:00-23:50 Ignition time PRG4
STOP PRG4
OFF-00:00-23:50 Switch-o time PRG4
MONDAY...SUNDAY
On/o Enable/disable the days of PRG4
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Terry plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Terry plus in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Terry plus

Extraflame Terry plus User Manual - German - 40 pages

Extraflame Terry plus User Manual - Dutch - 40 pages

Extraflame Terry plus User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info