696239
13
Zoom out
Zoom in
Previous page
1/40
Next page
13ENGLISH
WITH PROBE NTC 10K
Remove the bridge on 1 and connect the NTC probe in the room that you wish to thermostat via duct 1.
3 management methods:
DuCtInG CHARACtERIstICs
The stove is equipped with 2 independent outputs for ducting.
Ducts 1 - 2 are active by default.
Characteristics:
ducting output diameter: 2x80 mm
maximum recommended ducting length 8 m
thermostatable ducting
The speed adjustment can be set in 3 modes: OFF, AUTO, COMFORT
independent activatable/deactivatable ducting (ONOFF)
OpERAtIOn OF DEFAult DuCtInG
By default ducts 1 and 2 are always in demand (bridges on 1 and 2 present) and follow the operation of the stove.
- No setting required.
OpERAtIOn OF DuCtInG wItH tHERmOstAt OR pROBE (OptIOnAl)
The stove is equipped with two independent motors for ducting. The connection of an external thermostat or a temperature probe (NTC
10K) in inputs 1 and 2 placed at the back of the stove, will allow for the duct motor to be controlled regardless of the operation of the stove.
Simply connect the room thermostat/probe and set the desired temperature.
For details on setting the ducting, see chapter:" Menu - Ducting"
WITH ROOM THERMOSTAT OPTIONAL
Remove the bridge on 1 and connect the room thermostat that you wish to thermostat via duct 1.
3 management methods:
DUCTING OPERATION WITH ROOM THERMOSTAT OPTIONAL
SET on OFF
(the temperature setting is not visible)
The ducted motor will remain o unless the fumes temperature exceeds the normal
operating temperature
SET on AUTO
(the temperature setting is not visible)
Once the specic activation threshold has been reached and exceeded, when the
temperature has not been reached (CLOSED CONTACT), the duct motor will follow
the operation of the stove.
Once the temperature set on the thermostat has been reached (OPEN CONTACT), the
duct motor will turn OFF and then it will turn back on when required.
SET on COMFORT
(the temperature setting is not visible)
Once the specic activation threshold has been reached and exceeded, when the
temperature has not been reached (CLOSED CONTACT), the duct motor will follow
the operation of the stove but at a lower temperature than in SET AUTO, for greater
acoustic-environmental comfort.
Once the temperature set on the thermostat has been reached (OPEN CONTACT), the
duct motor will turn OFF and then it will turn back on when required.
SiMiLAR OPeRAting SettingS FOR DucteD MOtOR 2
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Terry plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Terry plus in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Terry plus

Extraflame Terry plus User Manual - German - 40 pages

Extraflame Terry plus User Manual - Dutch - 40 pages

Extraflame Terry plus User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info