811695
28
Zoom out
Zoom in
Previous page
1/40
Next page
28 ENGLISH
SETTINGS
• DATETIME
• LANGUAGE
• SET DEGREES
See chapter: commiSSioning SettingS.
DISPLAY
This menu allows you to adjust the brightness of the display. The values range from OFF, 1 to 20. If set to OFF, the display backlighting is set
to maximum brightness and then, turns o after a 60 second delay.
The backlighting can be turned on again by pressing any key or if the stove is in alarm status.
CONTROLS PROCEDURE
Press key 6.
Press 3 until SETTINGS appears and conrm by pressing 6.
Keep pressing 3 until DISPLAY appears and conrm by pressing 6.
Use keys 4 -5 to set the desired intensity (SET)
Press key 6 to conrm and key 1 to return to the previous menus to the initial state.
STAND  BY
The STANDBY function, if enabled, is used to turn the stove via an additional thermostat.
CONTROLS PROCEDURE
Press key 6.
Press 3 until SETTINGS appears and conrm by pressing 6.
Keep pressing 3 until STANDBY appears and conrm by pressing 6.
Use keys 4-5 to enable (ON) / disable (OFF).
Press 1 several times to conrm and exit the menu
FIRST LOAD
This function allows to ll the auger, facilitating the rst start-up phases of the stove, or in the event that the pellet hopper is empty.
With the stove cold and "OFF", make sure the pellet has been introduced inside the tank and activate the FIRST LOAD function, conrming
with OK.
To interrupt continuous loading, simply press key 1 for 3 seconds.
CONTROLS PROCEDURE
Press key 6.
press 3 until SETTINGS appears and conrm by pressing 6.
Keep pressing 3 until FIRST LOAD appears and conrm by pressing 6.
Use keys 4 and 5 for enabling “ON” or disabling “OFF”
Press key one several times to conrm and exit the menu.
OUTLET AIR
This function allows any air in the stove to be discharged. By activating the pump function, it will be powered alternatively with 30 second
work phases and 30" stop for 15 minutes. With the stove cold and in "OFF", activate the OUTLET AIR function, pressing key 6 to conrm. To
interrupt, press and hold key 1 for 3 seconds.
Attention: before activating the "OUTLET AIR" function, make sure you have opened the vent screw of the manual vent valve.
CONTROLS PROCEDURE
Press key 6.
Press 3 until SETTINGS appears and conrm by pressing 6.
Keep pressing 3 until OUTLET AIR appears and conrm by pressing 6.
Use keys 4 and 5 for enabling “ON” or disabling “OFF”
Press key one several times to conrm and exit the menu.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Rosanna Idro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Rosanna Idro in the language / languages: English as an attachment in your email.

The manual is 6.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Rosanna Idro

Extraflame Rosanna Idro User Manual - German - 40 pages

Extraflame Rosanna Idro User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info