695970
5
Zoom out
Zoom in
Previous page
1/40
Next page
5ENGLISH
WATER FLOW
(kg/h)
WATER SIDE
RESISTANCE
(mbar)
PK15
Temperature jump corresponding
T = 10K 1300 60
T = 20K 650 15
PK20
Temperature jump corresponding
T = 10K 1730 106
PR20
T = 20K 865 26
PK30
Temperature jump corresponding
T = 10K 2601 1687
PR30
T = 20K 1301 422
INTRODUCTION
The boilers produced in our factory are built with attention to the individual components so as to protect both the user and the installer
from any accidents. It is therefore recommended that after any intervention on the product, the authorised sta pay particular attention
to the electric connections, especially the stripped parts of the wires. These must not escape from the terminal board in any situation, thus
preventing possible contact with the live parts of the wire.
The instruction manual is an integral part of the product: make sure that it always accompanies the appliance, even if transferred to other
owners or user or is transferred to another place. If it is damaged or lost, request another copy from the area technician.
This generator must be intended for the use it has been specically made for. The manufacturer is exemptded from any liability, contractual
and extracontractual, for injury/damage caused to persons/animals and objects, due to installation, adjustment and maintenance errors and
improper use.
INSTALLATION
Installation of the generator and auxiliary equipment in relation to the heating system must comply with all current Standards and Regulations
and to those envisioned by the law. Installation must be carried out by authorised sta, who must provide the buyer with a declaration of
conformity for the system and will assume full responsibility for nal installation and as a consequence the correct functioning of the installed
product.
It is necessary to bear in mind all laws and national, regional, provincial and town council Standards present in the country the appliance has
been installed.
The Manufacturer cannot be held responsible for the failure to comply with such precautions. It is recommended to wash all the pipes of
the system well before installation to remove any residue that could compromise the correct operation of the appliance. During installation,
inform the user regarding:
a. If water leaks, he must close the water supply and promptly inform the after-sales technical service.
b. The system working pressure must be checked periodically. If the generator is not used for a long period of time, it is recommended to
contact the after-sales technical service to carry out at least the following operations:
- Set the master switch to position 0.
- Close the water taps of both the heating system and the domestic hot water system.
- Empty the heating system and the domestic hot water system if there is risk of freezing.
COMMISSIONING
After removing the packaging, ensure that the content is intact and complete.
Otherwise, contact the dealer where the appliance was purchased.
When commissioning the product, verify that all safety and control devices the generator consists of work properly. All electrical components
that make up the generator must be replaced with original spare parts exclusively by an authorised technical assistance centre, thereby
guaranteeing correct operation.
Before leaving the system, the sta in charge of commissioning must monitor the operation of the generator for at least one complete work
cycle. The geneerator must be serviced at least once a year, programming it in advance with the technical assistance centre
STANDARDS
The boilers have been designed and realised in compliance with the following Directives:
UNI EN 303-5 Boilers for central heating. Boilers for solid fuel, with manual and automatic feeding, with a nominal heat output of up to
500 kW
DIRECTIVES
2006/42/EC: directive MD
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame PR30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame PR30 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame PR30

Extraflame PR30 User Manual - German - 40 pages

Extraflame PR30 User Manual - Dutch - 40 pages

Extraflame PR30 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info