695968
13
Zoom out
Zoom in
Previous page
1/40
Next page
13ENGLISH
DISTANCES OF SAFETY DEVICES ACCORDING TO THE LEGISLATION
The temperature safety sensors must be on the machine at a distance no greater than 30 cm from the ow connection. Whenever the
generators lack a device, those missing can be installed on the generator ow pipe, within a distance no greater than 1m from the machine.
CHECKS WHEN STARTING FOR THE FIRST TIME
Before connecting the boiler:
a) Discharge the air from the system using the air vent in the boiler and activating the air discharge cycle from the display
b) wash all system piping thoroughly in order to remove any residues which might compromise the correct operation of certain system
components (pumps, valves, etc.).
c) The company recommends installing a magnetic lter in the generator return, to increase the operational life of the boiler, make it easier
to remove impurities and increase the overall eciency of the system.
It is also advisable to perform an inspection using appropriate instruments, to check for any stray currents that may cause corrosion.
d) Check that the ue has adequate draft, is not narrowed and that other appliances do not discharge into the ue. This is to prevent
unexpected power increases. Only after this check can the ue tting be mounted between the boiler and the ue. It is advisable to check the
ttings with pre-existing ues.
ANTICONDENSATION DEVICE MANDATORY
It is mandatory to create a suitable anti-condensation circuit, which guarantees a return temperature of the unit of at least 55°C. The anti-
condensation valve, for example, is used in solid fuel boilers as it prevents the return of cold water in the exchanger. A high return temperature
improves eciency, reduces the formation of condensation from the fumes and extends the service life of the generator. The manufacturer
recommends using the 55°C model with 1” hydraulic connections.
For products with PWM* pump control, installation is considered equivalent to the creation of a suitable anti-condensation circuit in cases
where:
- the heat generator pump is the only one in the system, or
- between the heat generator and the system there is a plate heat exchanger, or
between the heat generator and the system there is a hydraulic compensator or an inertial storage device (buffer)
*Check the technical data sheet on the website.
Valve sold as an accessory (optional)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame PK30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame PK30 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame PK30

Extraflame PK30 User Manual - German - 40 pages

Extraflame PK30 User Manual - Dutch - 40 pages

Extraflame PK30 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info